how can i open sahing file in windows 2000 system

  • Thread starter Thread starter serdal
  • Start date Start date
S

serdal

Hi
i got windows 2000 server and 3 win Xp prof

I setup everything .I installed AD, DNS

But i can't open the sharing file or i can't sharing printer which is
installed windows Xp .I cna see the server from client .But i can't see
the client form any computer.
Please tell me how can i do ...
 
In
serdal said:
Hi
i got windows 2000 server and 3 win Xp prof

I setup everything .I installed AD, DNS

But i can't open the sharing file or i can't sharing printer
which is installed windows Xp .I cna see the server from client
.But i can't see the client form any computer.
Please tell me how can i do ...
Click to expand...

The XP client must be able to register its IP addresses in the DNS forward
lookup zone. All clients and the server must point only to the address of
the Win2k DNS, File sharing and Client for MS Networks bound. For the client
to be seen in Network Neighborhood NetBIOS over TCP/IP must be enabled.
Verify the existence of the client host records in yiour domain's forward
lookup zone with nslookup.
If all checks out see if you can connect by FQDN in your browser by typing
\\client.domain.com\
And run netdiag \v \test:dns on the clients you are sharing resources on.
The latest version of Netdiag can be downloaded from Microsoft, here:
http://www.microsoft.com/downloads/...FamilyID=AAE64B62-27C0-4523-8AF9-66A968A8C942

--
Best regards,
Kevin D4 Dad Goodknecht Sr. [MVP]
Hope This Helps
============================
http://www.lonestaramerica.com/
============================
When responding to posts, please "Reply to Group" via your
newsreader so that others may learn and benefit from your issue.
To respond directly to me remove the nospam. from my email.
==========================================
--
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
==========================================
Keep a back up of your OE settings and folders with
OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
==========================================
 
but i use ICS ,so all client get ip address from ICS ,when i check
DNS ,i coul't see client address in.How can i add client name to DNS
by using ICS ?

Thank you very much for your help?
 
In
serdal said:
but i use ICS ,so all client get ip address from ICS ,when i
check DNS ,i coul't see client address in.How can i add client
name to DNS by using ICS ?

Thank you very much for your help?
Click to expand...


The first thing you need to do is disable ICS It is not compatable with DNS.
will not support DDNS and cannot be reconfigured.

Configure NAT in RRAS to share you connection but don't let it install ICS

Either use static addressing or Use DHCP
Configure DHCP using the same IP range to make it easier you need these
scope options in DHCP:
003 Use the private address of the router or machine that has the internet
connection on it
006 DNS servers use *ONLY* the IP of the AD DNS server
015 DNS domain name, the DNS domain name of your AD domain.

For internet access follow this KB article to configure your DNS server:
300202 - HOW TO Configure DNS for Internet Access in Windows 2000
http://support.microsoft.com/default.aspx?scid=kb;en-us;300202&FR=1


--
Best regards,
Kevin D4 Dad Goodknecht Sr. [MVP]
Hope This Helps
============================
http://www.lonestaramerica.com/
============================
When responding to posts, please "Reply to Group" via your
newsreader so that others may learn and benefit from your issue.
To respond directly to me remove the nospam. from my email.
==========================================
--
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
==========================================
Keep a back up of your OE settings and folders with
OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
==========================================
 
In
serdal said:
but i use ICS ,so all client get ip address from ICS ,when i
check DNS ,i coul't see client address in.How can i add client
name to DNS by using ICS ?

Thank you very much for your help?
Click to expand...

Just to add, even the server *must* point to its own IP address for DNS.

--
Best regards,
Kevin D4 Dad Goodknecht Sr. [MVP]
Hope This Helps
============================
http://www.lonestaramerica.com/
============================
When responding to posts, please "Reply to Group" via your
newsreader so that others may learn and benefit from your issue.
To respond directly to me remove the nospam. from my email.
==========================================
--
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
==========================================
Keep a back up of your OE settings and folders with
OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
==========================================
 
Merhaba ;

Bu grup Türkiye için kullanýlýyor, buraya Türkçe daha detaylý sorunlarýnýzý
yazarsanýz size daha hýzlý yardýmcý olunacaktýr.

Ýyi çalýþmalar.

Okan Gürer.
 
Back
Top