Hot swap trays for 2k3

  • Thread starter Thread starter taipan
  • Start date Start date
T

taipan

Hi

New here. Looking for advice on Hot Swap hard drive trays for a new Dell
1600SC server.

Thought I could just buy a good quaility rack and some cartridges. Of
course it's not that easy. Server will run Windows 2003 Server.

I need advice on a HOT SWAP rack, or software that will do it.

Appears the Vantec EZ Swap 200 series SATA racks will do it. They are very
hard to find in stock

Any other solutions out there? Has to be hot swap. There used to be
software solutions that would allow it on with about any removable rack.
(alas Win98 only it appears) For w2k3, I'm just not sure. Using them for
backup. Can't shut down server to swap them.

Thanks
 
taipan said:
Hi

New here. Looking for advice on Hot Swap hard drive trays for a new Dell
1600SC server.

Thought I could just buy a good quaility rack and some cartridges. Of
course it's not that easy. Server will run Windows 2003 Server.

I need advice on a HOT SWAP rack, or software that will do it.

Appears the Vantec EZ Swap 200 series SATA racks will do it. They are very
hard to find in stock
Click to expand...

KingWin KF-83 ~$30 work well on my SBS2003 system.
Any other solutions out there? Has to be hot swap.
Click to expand...

Hotswap is a function of the spec SATA, disk controller and OS+device
drivers and not the trays.
There used to be
software solutions that would allow it on with about any removable rack.
(alas Win98 only it appears) For w2k3, I'm just not sure. Using them for
backup. Can't shut down server to swap them.
Click to expand...

Works here on SBS2003.
 
Thanks Ron

I buy most of my stuff from Newegg. Started by looking at Kingwin ATA.
Seem to be good quality. Not hot swap. Where did you find the KF- 83 at?

I need the whole thing and extra trays. (3 drives for rotating backup)

The Vantecs seem to be highly rated, but I've had good experiences with
Kingwin in the past.
 
taipan said:
Thanks Ron

I buy most of my stuff from Newegg. Started by looking at Kingwin ATA.
Seem to be good quality. Not hot swap.
Click to expand...

You are mistaken. The KF-83 is hotswap.
Where did you find the KF- 83 at?
http://www.axiontech.com/prdt.php?item=48961
http://store.yahoo.com/extremepcgear/kingwinkf83.html
http://www.kingwin.com/pdut_detail.asp?LineID=&CateID=43&ID=158
http://www.newegg.com/app/ViewProductDesc.asp?description=17-121-169&depa=0

http://www.kingwin.com/where_buy.asp?ContinentID=1&CountryID=1

I need the whole thing and extra trays. (3 drives for rotating backup)
Click to expand...

Yes, I put 250GB SATA WDC drives in them and use www.acronis.com for image
backup. I also keep my 74GB SATA system driveS(mirror) in them.
The Vantecs seem to be highly rated, but I've had good experiences with
Kingwin in the past.
Click to expand...

I like the three fans.
 
Back
Top