High CPU Utilization on W2K TS

  • Thread starter Thread starter Kevin Robertson
  • Start date Start date
K

Kevin Robertson

I have a terminal server that is having CPU utilization issues. The server
is a Dell PE2650 with Dual 3.3GHz Xeon processors and 4 GB of RAM.

If no users are logged in, the server runs normally. However, once I get
about 20-40 users on it, the System process (not the System Idle process)
goes crazy. It consumes 25-60% of the CPU.

I have applied the 827825 hotfix to resolve a profile problem.

The OS is Win2k Advanced Server SP3, with all current updates (with the
exception of SP4, which caused more problems than it was worth).

Any help would be greatly appreciated.

Thanks.

Kevin Robertson
Network Engineer
Prosperity Bank
 
As a sidenote, I am also having problems with IE. When I launch IE, it takes
between 1 and 3 minutes to load a page. It basically just sits there and
does nothing. I can go to another terminal server and launch IE, and the
page loads immediately.
 
Just as an experiment, could you install SP4 on a test
machine and see if the problem still exists?

-M
 
i am having the same problem, just posted in this forum
as well.

i get 90% cpu usage when only one user is logged in and
is idle.

i have win2k server, sp4.
 
Are you also having problems with the system using all the
processor cycles? Have you tried disabling redirected
printer mapping?

-M
 
Back
Top