Help with Vista Install

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

My system has gone through the Upgrade wizard, which tells me the system is
ready for Vista.
When I load Vista ( Upgrade or Clean Install) it loads all the files
neccessary without a problem. When it reboots for seting up the system, the
systems hangs showing a black screen and a progress bar running continuosly.
I have tried multiple times and get the same result. it just hangs on the
black screen with the status bar continuously running, like it is searching
for something for hours. I even let it sit overnight.
What am I missing.

My system config is
AMD turion 6 dual core processor
Current windows: Media center edition
Dual Layer DVD burner
NVidida GeForce Go 6100 graphics
1 GB DDR2 ram
over 45 Gigs of free space
 
Anil,

Given your setup, there doesn't seem to be any reason why you can't put up
Vista, and you have plenty of space.

Try this:

Make sure when you reburn you do it from within XP and run the setup that
will show up on the XP desktop:

Reburn Option:

1) Burn slowly. 4X should be fine. Some of this probably varies with the
DVD writer and the media.

2) Make sure to select an ISO tab if there is one on the burning software,
and make sure to close the session on the burn.

3) Try this tweak on your Windows XP drive and burn from there:

Get to Dev Manager by typing devmgmt.msc in run/win key + pause break or
Rt.click My Computer>Prop>hardware tab>Device Manager if you like 5 steps
instead of one cmd. If you're set to PMI here change to DMO and if set to
DMO change to PMI using these 5 steps:

1) Click the + in front of IDE ATA/ATAPI Controllers

2) Double Click the Secondary IDE Controller

3) Click Advanced Settings

4) Under Device 1  Next to Transfer Mode choose DMA (or vise versa)>Click
OK

5) Reboot your System

6) Check your burn with a CRC utility and the links for this are below
including the direct Taco Bell link. It is very classy, sophisticated, and
very Wagner Edstrom/McCann Ericson esque for MSFT to adopt a Taco Bell url
for their public Beta 2 CRC checker. Rock on Redmond Rednecks.

Obtain CRC Utility for Vista Beta 2 Here: (The CRC utility is a way to check
the integrity of the ISO Burn which is probably where your problem
lies--it's #1 on the list):

Here's a link:

The CRC utility for Beta 2 is contained here (Scroll down to the bottom
under "Additional Information"

Microsoft® Windows® Software Development Kit (SDK) for Beta 2 of Windows
Vista and WinFX Runtime Components
http://www.microsoft.com/downloads/...73-F5EA-4B7B-B022-97755838DB94&displaylang=en

Additional Information:

To verify that your download of an ISO file for the Windows SDK Beta 2 build
is not corrupt, download the CRC Utility. (Note: this is not a Microsoft
application. Use at your own risk.)

To run the CRC test, open a command prompt and run the utility. providing it
the name of the file (i.e. crc
c:\6.0.5383.1.1.WindowsSDK_Vista_idw.DVD.Rel.img) The CRC utility will run
two tests on the ISO: it will verify if the ISO is valid, and it will give
the AutoCRC signature for the file. The AutoCRC signature for the Windows
SDK Beta 2 ISO is 0x28434EEF. You should also confirm the size of the ISO is
correct: 1.14 GB (1,229,355,008 bytes).

If it fails any of these three tests, re-download the ISO.

I really like the direct link to it though if you right click CRC here>left
click Properties:
http://tacobell.iexbeta.com/longhorn/crc.exe

Good luck,

CH
 
Back
Top