HELP WITH SATA on P5WD2

  • Thread starter Thread starter dennis
  • Start date Start date
D

dennis

Hi all,

Just finished putting together my new motherboard, using a MAXTOR 200 Gig
drive SATA and nothing else, attempted to load W2K with the 32 bit 3132
drivers and got inaccessable boot device. Attempted to try XP64 and got a
0X0000007B inaccessable boot device I think again. this time used the 64bit
3132 sata drivers, can someone help me please.

Thanks

Dennis
 
"dennis" <[email protected]> said:
Hi all,

Just finished putting together my new motherboard, using a MAXTOR 200 Gig
drive SATA and nothing else, attempted to load W2K with the 32 bit 3132
drivers and got inaccessable boot device. Attempted to try XP64 and got a
0X0000007B inaccessable boot device I think again. this time used the 64bit
3132 sata drivers, can someone help me please.

Thanks

Dennis
Click to expand...

First off, I presume the BIOS is set to IDE mode for the 3132 ?

You can get drivers here.

http://www.siliconimage.com/support/

If you want, you can click "KnowledgeBase" on the left hand side.

Then "Serial ATA"
"Controllers"
"SIL3132"

The last four files could be of use to you. These are .inf style
and the contents of the ZIP should be copied to a floppy, for use
with F6 at the beginning of the install.

Paul
 
Back
Top