Help with home network

  • Thread starter Thread starter Matt
  • Start date Start date
M

Matt

I have ran and setup a home network using the Network
Setup Wizard. I dont know how to acces one of the
computers from the other. What do I do after I run the
Network Wizard? I have 2 computers running through a hub
and I wanted to transfer a file to the other computer on
my hub. Any saaistance will be greatly appreciated.
Thank You
 
-----Original Message-----
I have ran and setup a home network using the Network
Setup Wizard. I dont know how to acces one of the
computers from the other. What do I do after I run the
Network Wizard? I have 2 computers running through a hub
and I wanted to transfer a file to the other computer on
my hub. Any saaistance will be greatly appreciated.
Thank You
.
Click to expand...
If everything is wired ok and you have File and printer
sharing selected under the TCP/IP properties on both
machines. then all you need to do is share the file or
folder you wish to transfer from and it should show up
under the Network Neighborhood icon on you desktop of the
other machine. Note you may need to drill down a few
levels to get to the file.
 
Back
Top