Help with email submit button

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hi all! I'm very new to Frontpage, created my first website last week. I'm
trying to add a contact page with a form submit button that emails me the
info. When I open the form it says:

"[FrontPage Save Results Component]"

across the top for some reason. When I fill it out & hit submit I get an
error screen that says:

"FrontPage Run-Time Component Page
You have submitted a form or followed a link to a page that requires a web
server and the FrontPage Server Extensions to function properly.

This form or other FrontPage component will work correctly if you publish
this web to a web server that has the FrontPage Server Extensions installed.

Click the <Back> arrow to return to the previous page."

I've checked my webserver & it says that the FP server extensions are
installed, and everything else works fine. Any ideas? Here is a link:

http://www.exposuresbynoel.com/Info/Contact.htm
 
Did you publish the site to a server that has the FP extension via FP's http mode? If yes, then you
need to contact your web host to have them configure the extensions to process email.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
==============================================
If you feel your current issue is a results of installing
a Service Pack or security update, please contact
Microsoft Product Support Services:
http://support.microsoft.com
If the problem can be shown to have been caused by a
security update, then there is usually no charge for the call.
==============================================
 
The error message text comes from nortbots.htm, and indicates that the
form was FTPed to the server, or the form is being tested on a disc
based web.
The form must be http:// published to a server running the FrontPage
extensions, using a destination similar to http://example.com, or
http://www.example.com .

If you have used FTP, the FrontPage extensions may need to be checked
or re-installed; FTP often corrupts the extensions.
 
I used the "publish web" button in FP to send the files to the web server.
The server says that the FP extensions are installed. Should I remove them &
re-install? Thanks for the replies!

Ronx said:
The error message text comes from nortbots.htm, and indicates that the
form was FTPed to the server, or the form is being tested on a disc
based web.
The form must be http:// published to a server running the FrontPage
extensions, using a destination similar to http://example.com, or
http://www.example.com .

If you have used FTP, the FrontPage extensions may need to be checked
or re-installed; FTP often corrupts the extensions.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/

Noel said:
Hi all! I'm very new to Frontpage, created my first website last
week. I'm
trying to add a contact page with a form submit button that emails
me the
info. When I open the form it says:

"[FrontPage Save Results Component]"

across the top for some reason. When I fill it out & hit submit I
get an
error screen that says:

"FrontPage Run-Time Component Page
You have submitted a form or followed a link to a page that requires
a web
server and the FrontPage Server Extensions to function properly.

This form or other FrontPage component will work correctly if you
publish
this web to a web server that has the FrontPage Server Extensions
installed.

Click the <Back> arrow to return to the previous page."

I've checked my webserver & it says that the FP server extensions
are
installed, and everything else works fine. Any ideas? Here is a
link:

http://www.exposuresbynoel.com/Info/Contact.htm
 
OK, but make sure you're not FTP'ing the files through Frontpage - use the
HTTP mode; you can do both in FP. Use only HTTP mode for servers that have
the FPSE enabled.

Perhaps reinstalling the extensions will help....

Noel said:
I used the "publish web" button in FP to send the files to the web server.
The server says that the FP extensions are installed. Should I remove
them &
re-install? Thanks for the replies!

Ronx said:
The error message text comes from nortbots.htm, and indicates that the
form was FTPed to the server, or the form is being tested on a disc
based web.
The form must be http:// published to a server running the FrontPage
extensions, using a destination similar to http://example.com, or
http://www.example.com .

If you have used FTP, the FrontPage extensions may need to be checked
or re-installed; FTP often corrupts the extensions.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/

Noel said:
Hi all! I'm very new to Frontpage, created my first website last
week. I'm
trying to add a contact page with a form submit button that emails
me the
info. When I open the form it says:

"[FrontPage Save Results Component]"

across the top for some reason. When I fill it out & hit submit I
get an
error screen that says:

"FrontPage Run-Time Component Page
You have submitted a form or followed a link to a page that requires
a web
server and the FrontPage Server Extensions to function properly.

This form or other FrontPage component will work correctly if you
publish
this web to a web server that has the FrontPage Server Extensions
installed.

Click the <Back> arrow to return to the previous page."

I've checked my webserver & it says that the FP server extensions
are
installed, and everything else works fine. Any ideas? Here is a
link:

http://www.exposuresbynoel.com/Info/Contact.htm
 
Well, reinstalling the extensions made the form work. But I'm not sure how
to change my Publish Web function to use HTTP mode. The only place I found
to do it is in the dialog box by changing it from ftp://exposuresbynoel.com
to http://exposuresbynoel.com, but then it won't accept my password to
connect. Hmmm....

Andrew Murray said:
OK, but make sure you're not FTP'ing the files through Frontpage - use the
HTTP mode; you can do both in FP. Use only HTTP mode for servers that have
the FPSE enabled.

Perhaps reinstalling the extensions will help....

Noel said:
I used the "publish web" button in FP to send the files to the web server.
The server says that the FP extensions are installed. Should I remove
them &
re-install? Thanks for the replies!

Ronx said:
The error message text comes from nortbots.htm, and indicates that the
form was FTPed to the server, or the form is being tested on a disc
based web.
The form must be http:// published to a server running the FrontPage
extensions, using a destination similar to http://example.com, or
http://www.example.com .

If you have used FTP, the FrontPage extensions may need to be checked
or re-installed; FTP often corrupts the extensions.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/

Hi all! I'm very new to Frontpage, created my first website last
week. I'm
trying to add a contact page with a form submit button that emails
me the
info. When I open the form it says:

"[FrontPage Save Results Component]"

across the top for some reason. When I fill it out & hit submit I
get an
error screen that says:

"FrontPage Run-Time Component Page
You have submitted a form or followed a link to a page that requires
a web
server and the FrontPage Server Extensions to function properly.

This form or other FrontPage component will work correctly if you
publish
this web to a web server that has the FrontPage Server Extensions
installed.

Click the <Back> arrow to return to the previous page."

I've checked my webserver & it says that the FP server extensions
are
installed, and everything else works fine. Any ideas? Here is a
link:

http://www.exposuresbynoel.com/Info/Contact.htm
 
You need to contact your web host to make sure you have access to your account via FP http mode and
have the correct login info.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
==============================================
If you feel your current issue is a results of installing
a Service Pack or security update, please contact
Microsoft Product Support Services:
http://support.microsoft.com
If the problem can be shown to have been caused by a
security update, then there is usually no charge for the call.
==============================================

Noel said:
Well, reinstalling the extensions made the form work. But I'm not sure how
to change my Publish Web function to use HTTP mode. The only place I found
to do it is in the dialog box by changing it from ftp://exposuresbynoel.com
to http://exposuresbynoel.com, but then it won't accept my password to
connect. Hmmm....

Andrew Murray said:
OK, but make sure you're not FTP'ing the files through Frontpage - use the
HTTP mode; you can do both in FP. Use only HTTP mode for servers that have
the FPSE enabled.

Perhaps reinstalling the extensions will help....

Noel said:
I used the "publish web" button in FP to send the files to the web server.
The server says that the FP extensions are installed. Should I remove
them &
re-install? Thanks for the replies!

:

The error message text comes from nortbots.htm, and indicates that the
form was FTPed to the server, or the form is being tested on a disc
based web.
The form must be http:// published to a server running the FrontPage
extensions, using a destination similar to http://example.com, or
http://www.example.com .

If you have used FTP, the FrontPage extensions may need to be checked
or re-installed; FTP often corrupts the extensions.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/

Hi all! I'm very new to Frontpage, created my first website last
week. I'm
trying to add a contact page with a form submit button that emails
me the
info. When I open the form it says:

"[FrontPage Save Results Component]"

across the top for some reason. When I fill it out & hit submit I
get an
error screen that says:

"FrontPage Run-Time Component Page
You have submitted a form or followed a link to a page that requires
a web
server and the FrontPage Server Extensions to function properly.

This form or other FrontPage component will work correctly if you
publish
this web to a web server that has the FrontPage Server Extensions
installed.

Click the <Back> arrow to return to the previous page."

I've checked my webserver & it says that the FP server extensions
are
installed, and everything else works fine. Any ideas? Here is a
link:

http://www.exposuresbynoel.com/Info/Contact.htm
 
I figured it out now. When I reinstalled the extensions I had to reset the
password, so now HTML publishing works. Thank you to everyone for all the
help!

Thomas A. Rowe said:
You need to contact your web host to make sure you have access to your account via FP http mode and
have the correct login info.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
==============================================
If you feel your current issue is a results of installing
a Service Pack or security update, please contact
Microsoft Product Support Services:
http://support.microsoft.com
If the problem can be shown to have been caused by a
security update, then there is usually no charge for the call.
==============================================

Noel said:
Well, reinstalling the extensions made the form work. But I'm not sure how
to change my Publish Web function to use HTTP mode. The only place I found
to do it is in the dialog box by changing it from ftp://exposuresbynoel.com
to http://exposuresbynoel.com, but then it won't accept my password to
connect. Hmmm....

Andrew Murray said:
OK, but make sure you're not FTP'ing the files through Frontpage - use the
HTTP mode; you can do both in FP. Use only HTTP mode for servers that have
the FPSE enabled.

Perhaps reinstalling the extensions will help....

I used the "publish web" button in FP to send the files to the web server.
The server says that the FP extensions are installed. Should I remove
them &
re-install? Thanks for the replies!

:

The error message text comes from nortbots.htm, and indicates that the
form was FTPed to the server, or the form is being tested on a disc
based web.
The form must be http:// published to a server running the FrontPage
extensions, using a destination similar to http://example.com, or
http://www.example.com .

If you have used FTP, the FrontPage extensions may need to be checked
or re-installed; FTP often corrupts the extensions.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/

Hi all! I'm very new to Frontpage, created my first website last
week. I'm
trying to add a contact page with a form submit button that emails
me the
info. When I open the form it says:

"[FrontPage Save Results Component]"

across the top for some reason. When I fill it out & hit submit I
get an
error screen that says:

"FrontPage Run-Time Component Page
You have submitted a form or followed a link to a page that requires
a web
server and the FrontPage Server Extensions to function properly.

This form or other FrontPage component will work correctly if you
publish
this web to a web server that has the FrontPage Server Extensions
installed.

Click the <Back> arrow to return to the previous page."

I've checked my webserver & it says that the FP server extensions
are
installed, and everything else works fine. Any ideas? Here is a
link:

http://www.exposuresbynoel.com/Info/Contact.htm
 
Back
Top