Help with 2000 server RRAS an NAT

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

heres my situation i would be so greatful if anyone could help

My server is DC, dhcp server, an dns server with 2 NICs.

1 Nic is connected to switch which connects to the internal network with an
ip address of 192.168.100.2

The other NIC is connected to a D link router with dhcp on. the gateway for
the router is 192.168.1.1

When i run the configuration when you enable RRAS everything goes fine until
i try to use the internet on one of the client computers i get page cannot be
displayed which tells me its a dns problem. The Mcafee virus scan is able to
check for updates though.

The server assigns the client computers with with a gateway IP which is the
same as the servers IP.

Does the gateway on the machines need to be changed to that of the router or
would it be the server.
 
We need more information to help. How do you connect to the Internet? What's the client IP? Also you may have name resolution issue when enabling RRAS on a DC. this search result may help,

Name resolution on VPN Name resolution Issue in a VPN client Name Resolution and Connectivity Issues on W2K Domain Controller with RRAS and DNS Installed ...
www.chicagotech.net/nameresolutionpnvpn.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
heres my situation i would be so greatful if anyone could help

My server is DC, dhcp server, an dns server with 2 NICs.

1 Nic is connected to switch which connects to the internal network with an
ip address of 192.168.100.2

The other NIC is connected to a D link router with dhcp on. the gateway for
the router is 192.168.1.1

When i run the configuration when you enable RRAS everything goes fine until
i try to use the internet on one of the client computers i get page cannot be
displayed which tells me its a dns problem. The Mcafee virus scan is able to
check for updates though.

The server assigns the client computers with with a gateway IP which is the
same as the servers IP.

Does the gateway on the machines need to be changed to that of the router or
would it be the server.
 
im going to use a draytek router instead an put this on the same subnet as
the server. How would i configure the router so that all the clients on lan
can use the internet ?
 
Back
Top