HELP:!! Windows Server 2000 5.00 w/SP4 not allowing auto Update

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello,

I am running Windows Server 2000 V 5.00.2195 SP4 and IE V 6.0.2800.1106.

When I try to initiate automatic updates through IE's "Windows Update"
function it fails, telling me that "User Data Persistance must be set to
enable". The problem is that it IS set to "Enable"
The result is that I can not load any of the Microsoft updates.

Any ideas?

Thanks,

Richy
 
Try asking them here.

http://www.microsoft.com/communitie...d45-de9e-4fc5-9bc1-2d1d0de6daee&lang=en&cr=US

--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Hello,
|
| I am running Windows Server 2000 V 5.00.2195 SP4 and IE V 6.0.2800.1106.
|
| When I try to initiate automatic updates through IE's "Windows Update"
| function it fails, telling me that "User Data Persistance must be set to
| enable". The problem is that it IS set to "Enable"
| The result is that I can not load any of the Microsoft updates.
|
| Any ideas?
|
| Thanks,
|
| Richy
 
When I had this issue I contact MS support and they had me follow the
below pasted steps. Note that I am not saying that all of these steps
are safe or that they will fully fix your problems because I am not
sure what your exact error number was.

I hope that helps.

1. Click Start, Run, type: notepad C:\register.bat and press Enter.
Choose Yes when you are prompted.
2. Copy the following commands and then paste them into the opened
Notepad window.

regsvr32 Inseng.dll
regsvr32 Oleaut32.dll
regsvr32 Ole32.dll
regsvr32 Urlmon.dll
regsvr32 Mssip32.dll
regsvr32 wuapi.dll
regsvr32 wups.dll
regsvr32 wuaueng.dll
regsvr32 wucltui.dll
regsvr32 wuweb.dll
regsvr32 msxml.dll
regsvr32 msxml2.dll
regsvr32 msxml3.dll
regsvr32 softpub.dll
regsvr32 initpki.dll
regsvr32 wintrust.dll
regsvr32 dssenh.dll
regsvr32 rsaenh.dll
regsvr32 gpkcsp.dll
regsvr32 sccbase.dll
regsvr32 slbcsp.dll
regsvr32 cryptdlg.dll
regsvr32 jscript.dll

3. After you paste the above commands, please close the Notepad window.
Choose Yes when you are prompted to save the file.
4. Click Start, Run, type: C:\register.bat and press Enter to run the
commands we have pasted.

Step 1: Re-register system files
=====================
1. Click Start, Run, type: notepad C:\register.bat and press Enter.
Choose Yes when you are prompted.
2. Copy the following commands and then paste them into the opened
Notepad window: .

NET STOP BITS
NET STOP WUAUSERV
REGSVR32 C:\WINDOWS\SYSTEM32\WUAUENG.DLL /U /S
REGSVR32 C:\WINDOWS\SYSTEM32\WUAUENG1.DLL /U /S
REGSVR32 C:\WINDOWS\SYSTEM32\WUAPI.DLL /U /S
REGSVR32 C:\WINDOWS\SYSTEM32\ATL.DLL /U /S
REGSVR32 C:\WINDOWS\SYSTEM32\WUCLTUI.DLL /U /S
REGSVR32 C:\WINDOWS\SYSTEM32\WUPS.DLL /U /S
REGSVR32 C:\WINDOWS\SYSTEM32\IUENGINE.DLL /U /S
REGSVR32 C:\WINDOWS\SYSTEM32\WUWEB.DLL /U /S REN
"%WINDIR%\SOFTWAREDISTRIBUTION" "OLDSDVINOD"
REGSVR32 C:\WINDOWS\SYSTEM32\WUAUENG.DLL /S
REGSVR32 C:\WINDOWS\SYSTEM32\WUAUENG1.DLL /S
REGSVR32 C:\WINDOWS\SYSTEM32\WUAPI.DLL /S
REGSVR32 C:\WINDOWS\SYSTEM32\ATL.DLL /S
REGSVR32 C:\WINDOWS\SYSTEM32\WUCLTUI.DLL /S
REGSVR32 C:\WINDOWS\SYSTEM32\WUPS.DLL /S
REGSVR32 C:\WINDOWS\SYSTEM32\IUENGINE.DLL /S
REGSVR32 C:\WINDOWS\SYSTEM32\WUWEB.DLL /S NET START BITS NET START
WUAUSERV NET START CRYPTSVC
REGSVR32 VBSCRIPT.DLL /S
REGSVR32 JSCRIPT.DLL /S
REGSVR32 SCRRUN.DLL /S
REGSVR32 DISPEX.DLL /S
REGSVR32 MSSCRIPT.DLL /S
REGSVR32 SOFTPUB.DLL /S
REGSVR32 WINTRUST.DLL /S
REGSVR32 INITPKI.DLL /S
REGSVR32 URLMON.DLL /S
REGSVR32 DSSENH.DLL /S
REGSVR32 MSXML.DLL /S
REGSVR32 MSXML2.DLL /S
REGSVR32 MSXML3.DLL /S
REGSVR32 RSAENH.DLL /S
REGSVR32 GPKCSP.DLL /S
REGSVR32 SCCBASE.DLL /S
REGSVR32 SLBCSP.DLL /S
REGSVR32 CRYPTDLG.DLL /S
REGSVR32 MSSIP32.DLL /S

3. After you paste the above commands, please close the Notepad window.
Choose Yes when you are prompted to save the file.
4. Click Start, Run, type: C:\register.bat and press Enter to run the
commands we have pasted.

If the issue persists, please refer to the step 2.

Step 2: Reset the paremeters of the Automatic Updates service
===================== 1. Click Start, click Run, type cmd, and then
click OK.
2. Type: Sc sdset wuauserv
D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU),
and then press ENTER.

Please copy the above command, right click in the opened command
window, and then choose Paste. Press Enter and you will receive a
"Success" message.

3. Type Exit to close the command prompt.
4. Try Windows Update again.
 
Back
Top