G
Gianmaria Fontana di Sacculmino
Finally after ages, I've been able to build my new silent pc and this
morning I turned it on.
I'm facing a problem setting up a mirror RAID 1 with two sata HDs
connected to the VIA chipset. I'm following the manual but to me is
not clear; I select "create array" then second step "array mode" RAID1
<enter> ; now the F... manual (page 5-29 point 2) says that a pop up
meu appears, which is not so true since the message is rather
different from what the manual says, anyway I press N to crate only
and not duplicate (backup) and press <enter> From this point, the
manual says, one can select Auto Setup. I do this and press <enter>
but nothing seems to happen; If I press F1 I can see the disks and
their serial number which confirms that the disks are there and
recognized. At this point I need your help.
morning I turned it on.
I'm facing a problem setting up a mirror RAID 1 with two sata HDs
connected to the VIA chipset. I'm following the manual but to me is
not clear; I select "create array" then second step "array mode" RAID1
<enter> ; now the F... manual (page 5-29 point 2) says that a pop up
meu appears, which is not so true since the message is rather
different from what the manual says, anyway I press N to crate only
and not duplicate (backup) and press <enter> From this point, the
manual says, one can select Auto Setup. I do this and press <enter>
but nothing seems to happen; If I press F1 I can see the disks and
their serial number which confirms that the disks are there and
recognized. At this point I need your help.