HELP - Epson 600

  • Thread starter Thread starter Bob Churchill
  • Start date Start date
B

Bob Churchill

Nothing happens when I press the cleaning button after the ink cartridges
have been replaced.Both clamps are locked in place. The ink lights are both
on and the power light is flashing. Epson technical support is not available
until Monday morning. Any suggestions?

Thanks, Bob
 
Hi,

First thing I'd so is try reseating each of the cartridges, but if that
doesn't work then I'd try

resetting the electronics to default specs. The recipe below was sent to
me by Epson for a 740 but it works with the 600 as well and many of its
other models.



To perform a Master EPROM Reset:

1. Turn the printer off.
2. Disconnect the cable that connects from the computer to the printer.
3. With the printer turned off, hold down both the Paper and the Cleaning
Buttons at the same time.
4. Continue to hold the buttons and turn the printer on.
5. When the Paper Light begins to flash, release both the Paper and
Cleaning Buttons.
6. Immediately press the Paper Button once (All the lights will flash and
the printer will begin to charge).
7. When the Power light becomes steady, print.
 
Back
Top