HDD installation problem -- please help

  • Thread starter Thread starter Nick
  • Start date Start date
N

Nick

I'm having difficulty installing a hard drive in an Antec enclosure. the
drive cage has rubber grommets which it appears that regular hard drive
screws are not long enough. Antec included several types of screws and what
seems to be required is a provided flathead screw with half a smooth shank,
then equal length in threads. Could this be the needed part? The cage is
far from snug, yet I am leery of tightening it up so much. This is my first
assembly and the users manual seems quite sparse for me. There is no image
of how the drive should be mounted. Hard drive looks to mount halfway out
of the drive cage. I sure do not want to make mistakes. I appreciate any
assistance. Thank you.

Nick
 
<snip panic over screws>

Right or wrong, the large flathead screws appear to have worked. Apologies.

Best,

Nick
 
Nick said:
I'm having difficulty installing a hard drive in an Antec enclosure. the
drive cage has rubber grommets which it appears that regular hard drive
screws are not long enough. Antec included several types of screws and
what seems to be required is a provided flathead screw with half a smooth
shank, then equal length in threads. Could this be the needed part? The
cage is far from snug, yet I am leery of tightening it up so much. This is
my first assembly and the users manual seems quite sparse for me. There
is no image of how the drive should be mounted. Hard drive looks to mount
halfway out of the drive cage. I sure do not want to make mistakes. I
appreciate any assistance. Thank you.

Nick
Click to expand...


yes I have just rebuilt my system in a Thermaltake case with the same
system.............rubber mounted drives..................

GIVE me standard hard mounted drives anyday.
 
Back
Top