HDD failure

  • Thread starter Thread starter eye bro kit
  • Start date Start date
E

eye bro kit

Hey,

I have a Seagate Barracuda 7200.8 300 GB drive that has
decided after about a year not to be recognized any longer.
In POST, it reads as a string of numbers, then the system
hangs before going into Windows. Just for kicks I put it in
another machine; same thing. I then put it in an USB/IDE
enclosure and tried to read it externally from three
different machines; nothing.
It spins up fine, so I'm getting power to it, but I'm
thinking maybe the controller died? Any ideas? If this is
the case, is it a pretty easy thing to replace the
controller board? Never done it.

Thanks for any help.
 
eye bro kit said:
Hey,

I have a Seagate Barracuda 7200.8 300 GB drive that has decided after
about a year not to be recognized any longer. In POST, it reads as a
string of numbers, then the system hangs before going into Windows. Just
for kicks I put it in another machine; same thing. I then put it in an
USB/IDE enclosure and tried to read it externally from three different
machines; nothing.
It spins up fine, so I'm getting power to it, but I'm thinking maybe the
controller died? Any ideas? If this is the case, is it a pretty easy
thing to replace the controller board? Never done it.

Thanks for any help.
Click to expand...
Go to the Seagate site here
http://www.seagate.com/support/seatools/
Download and run the tools on your drive.
And I think Seagate do a long warrantee.
 
eye said:
Hey,

I have a Seagate Barracuda 7200.8 300 GB drive that has
decided after about a year not to be recognized any longer.
In POST, it reads as a string of numbers, then the system
hangs before going into Windows. Just for kicks I put it in
another machine; same thing. I then put it in an USB/IDE
enclosure and tried to read it externally from three
different machines; nothing.
It spins up fine, so I'm getting power to it, but I'm
thinking maybe the controller died? Any ideas? If this is
the case, is it a pretty easy thing to replace the
controller board? Never done it.
Click to expand...

It's delicate, and you need to get the EXACT right one. Animal
scacrifice may be required for the sucessful completion of this ritual.

You may, just for kicks try changing jumper settings first. Sometimes a
controller board doesn't die all at once, and one of the other settings
may work.(not too likely, but may as well try, it will do no harm)

There is an excellent chance of 100% data recovery if you send it
straight to a data recovery professional, as the platters are probably
undamaged.
 
Back
Top