HDC device

  • Thread starter Thread starter Charles
  • Start date Start date
C

Charles

I keep getting the message at boot up of: There was a
problem installing this hardware device.
Driver is not intented for this platform Secondary IDE
Channel.
I uninstalled the secondary device drive and thought it
would reinstall itself at boot up. It hasn't and that
was the error message I am getting. The device is an NEC-
2510a DVD+RW drive. I can't find the drivers for it.
Any help?
 
Check the jumper at the rear of the drive to ensure its correctly
configured.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Secondary IDE Channel - running in mixed modes 2
dvd drive not working 2
Device Location 6
Dell Optiplex graphics driver failure 2
Windows 10 One of my previous builds is experiencing random, multiple BSODs 9
Problem after uninstall Secondary IDE Channel 2
How To Relate IDE Controller To Physical Drive? 11
Is there a one correspondence between sockets on matherboard and channels, which are shown in the De 13

Back
Top