G
Guest
i installed a 200 gig hard drive and i only show 128 gigs. what would be the safest way to get the rest of my gigs with out lossing my info installed.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
R
Rich Barry
Try a Bios update for your Motherboard. Make sure that Windows Update SP1
is installed.
installed.
is installed.
the safest way to get the rest of my gigs with out lossing my infominataur1 said:i installed a 200 gig hard drive and i only show 128 gigs. what would be
installed.
J
Jerry
One - does your motherboard recognize drives larger than 137Gb?
Two - if one is OK then have you installed XP SP1?
Three- if two is ok then turn on 48-bit LBA.
installed.
Two - if one is OK then have you installed XP SP1?
Three- if two is ok then turn on 48-bit LBA.
the safest way to get the rest of my gigs with out lossing my infominataur1 said:i installed a 200 gig hard drive and i only show 128 gigs. what would be
installed.
D
DL
http://support.microsoft.com/default.aspx?scid=kb;en-us;303013&Product=winxp
installed.
the safest way to get the rest of my gigs with out lossing my infominataur1 said:i installed a 200 gig hard drive and i only show 128 gigs. what would be
installed.
K
Keith
i installed a 200 gig hard drive and i only show 128 gigs. what
would be the safest way to get the rest of my gigs with out
lossing my info installed.
Might be a BIOS limitation or XP. Check to see if the Hard Drives
installation software has a special program that goes in the boot
sector to help BIOS and Windows detect the large hard drive.