S
Shiva
Hi,
I've just bought a new harddrive, but it detected by the motherboard. The PC
displays the message 'Detecting Primary IDE-master' and then it hangs.
I made sure all the jumpers are set correctly (the new drive is the master,
my old drive is the slave).
Here is some more info:
- motherboard P6SET-ML. This is an old motherboard, perhaps that's the cause
of this problem. The processor is an Intel Celeron 600 Mhz
- The new drive, set as a master drive, is a Samsung Datalux 80 Gb
Any idea's?
Thanks in advance!
I've just bought a new harddrive, but it detected by the motherboard. The PC
displays the message 'Detecting Primary IDE-master' and then it hangs.
I made sure all the jumpers are set correctly (the new drive is the master,
my old drive is the slave).
Here is some more info:
- motherboard P6SET-ML. This is an old motherboard, perhaps that's the cause
of this problem. The processor is an Intel Celeron 600 Mhz
- The new drive, set as a master drive, is a Samsung Datalux 80 Gb
Any idea's?
Thanks in advance!