Harddisk failure

  • Thread starter Thread starter ICE
  • Start date Start date
I

ICE

Is the a way to recover data from a hdd that gives following error?
"The request could not be performed because of an I/O device error"
At boottime, the HDD is recognized (slower than normal) and a driveletter is
assigned to it in windows.
When clicking on the drive, the error appears. Afterwards, the driveletter
vanishes from the explorer window.
Any suggestions?

Thanks
 
Is the a way to recover data from a hdd that gives following error?
"The request could not be performed because of an I/O device error"
At boottime, the HDD is recognized (slower than normal) and a driveletter is
assigned to it in windows.
When clicking on the drive, the error appears. Afterwards, the driveletter
vanishes from the explorer window.
Any suggestions?

Thanks
Click to expand...

Can you access anything before the drive goes away or is it completely
inaccessible?

The first things to try are to first check the cables and see if anything
is loose. Then I'd power the system off for a hour to let everything cool
down to room temperature, then boot the system up and try and copy off the
files that you need. If that doesn't work there is a trick that has been
mentioned on this board a number of times which is to take the drive out,
seal it inside of a plastic bag and then put it in your freezer for a few
hours, then put it back into your system and copy your files off to
another drive. If that doesn't work your only remaining option is a
professional recovery service.

In the future be more diligent about doing backups.
 
When booting in MS-DOS, ms-dos tells me there are no HDDs available....as if
the HDD would not be partitioned.
 
ICE said:
Is the a way to recover data from a hdd that gives following error?
"The request could not be performed because of an I/O device error"
At boottime, the HDD is recognized (slower than normal) and a driveletter
is assigned to it in windows.
When clicking on the drive, the error appears. Afterwards, the driveletter
vanishes from the explorer window.
Any suggestions?

Thanks
Click to expand...
Try PCI File Recovery. Might help you out.
bw..OJ
 
When booting in MS-DOS, ms-dos tells me there are no HDDs available....as if
the HDD would not be partitioned.
Click to expand...

Are you using an NTFS filesystem? If so, then you will not see the HD
because MS-DOS doesn't recognize it - only FAT filesystems.

You need a utility called NTFS2DOS that I cited earlier.

http://www.datapol-technologies.com/dpe/recovery/ntfs/index.html

Follow the instructions and you will be able to mount an NTFS
filesystem from DOS - assuming your HD is working.
 
ICE said:
Is the a way to recover data from a hdd that gives following error?
"The request could not be performed because of an I/O device error"
At boottime, the HDD is recognized (slower than normal) and a driveletter is
assigned to it in windows.
When clicking on the drive, the error appears. Afterwards, the driveletter
vanishes from the explorer window.
Any suggestions?

Thanks
Click to expand...
You can try if you can access the HDD from another computer. If you
can't read it, then the MBR might be corrupt.
Then you can try this:
http://support.microsoft.com/kb/q69013/
 
Try PCI File Recovery. Might help you out.
Click to expand...

I would be a bit suspicious of a program where the descriptions refers
to file extensions as "disk formats".

Maybe it's a language problem.
 
Bob said:
I would be a bit suspicious of a program where the descriptions refers
to file extensions as "disk formats".

Maybe it's a language problem.
Click to expand...
Translated from german Bob. actually means `file types`. Funny people these
foreigners.
<g>. best wishes..OJ
 
Is the a way to recover data from a hdd that gives following
error?
"The request could not be performed because of an I/O device
error"
At boottime, the HDD is recognized (slower than normal) and a
driveletter is
assigned to it in windows.
When clicking on the drive, the error appears. Afterwards, the
driveletter
vanishes from the explorer window.
Any suggestions?

Thanks
Click to expand...

Can I assume you have installed another drive in your computer and
ruled out any problem with your BIOS or power supply etc?
Regardless I would install the suspect drive in another computer
setting it up as a slave drive and attempt to transfer the data from
it this way.
Preferably using a master drive with XP Pro installed....
If the drive boots up but there is no recognition of a partition I
would try a cheap shot of using seagates hard disk utilities to try
and make the drive bootable..Even if you use the appropriate hard disk
utility to prepare the drive to be a slave disk.
 
Back
Top