Hard Drive Upgrade

  • Thread starter Thread starter Herb
  • Start date Start date
H

Herb

Added 80Gb drive to supplement an existing 4Gb drive.
After completing drive installation, partitioning, etc.,
using drive installation CD, the new drive appears on "My
Computer," however, after rebooting the drive is not
recognized and boot screen stops at: "Press F4 to
continue." Have to disconnect new drive in order to reboot
system. Then the new drive is no longer available. Is
there a fix for this problem?
 
How did you connect the drive did check the settings on
the drive already installed. If the installed drive is
set to primary you will have to set the second drive to
secondary if it is set to cable select you will have to
set the new drive to cable select.
 
Back
Top