Hard Drive Swap

  • Thread starter Thread starter bigdummy
  • Start date Start date
B

bigdummy

How difficult would it be to remove a bad hard drive and replace it with a
new one? I have an H/P machine (a1130n) with a SeaGate Hard Drive.

I've removed the ribbon cable and power cable. The entire assembly has a
green plastic retention device on the rails that hold the drive(s). How is
the retention assembly removed?

I s this a procedure than can be done by myself?

ANY help appreciated!
 
bigdummy said:
How difficult would it be to remove a bad hard drive and replace it with a
new one? I have an H/P machine (a1130n) with a SeaGate Hard Drive.

I've removed the ribbon cable and power cable. The entire assembly has a
green plastic retention device on the rails that hold the drive(s). How is
the retention assembly removed?

I s this a procedure than can be done by myself?

ANY help appreciated!
Click to expand...

See page 8 "Removing a drive".

http://h10032.www1.hp.com/ctg/Manual/c00311110.pdf

Paul
 
Back
Top