Hard drive migration problems

  • Thread starter Thread starter RBM
  • Start date Start date
R

RBM

This is my first attempt at migrating and I seem to be doing something
wrong. I have an XP home machine. 80GB Seagate Barracuda SATA "C" drive,
that I want to replace with a 320GB Seagate SATA drive. I'm using Seagate's
Disk Wizard. This is what I've done:
Original "C" drive is on SATA third master channel
I've physically installed "Target" drive on fourth master channel, started
Disk Wizard
Disk Wizard erases "Target" drive and asks what I want to do, I click copy
to new bootable drive and remove old drive.
Disk Wizard takes about two hours copying, then instructs me on what to do
when it shuts machine down.
As per instructions I disconnect my DVD drive and original "C" drive, and
connect the new "target" drive to the third master channel and reboot.
The machine posts, begins to load windows, then displays my desktop minus
ALL icons and buttons.
Any suggestions are appreciated, tia, rbm
 
RBM said:
This is my first attempt at migrating and I seem to be doing something wrong. I have an XP home
machine. 80GB Seagate Barracuda SATA "C" drive, that I want to replace with a 320GB Seagate SATA
drive. I'm using Seagate's Disk Wizard.
Click to expand...

That is your main problem, its a lot easier to use True Image instead.

While superficially the main downside with TI is that it isnt free,
you need a decent backup app anyway, and you can use it for
that after you have migrated.
This is what I've done:
Original "C" drive is on SATA third master channel I've physically installed "Target" drive on
fourth master channel, started Disk Wizard
Click to expand...
Disk Wizard erases "Target" drive and asks what I want to do, I click copy to new bootable drive
and remove old drive.
Click to expand...
Disk Wizard takes about two hours copying,
Click to expand...

Urk, that's pretty obscene.
then instructs me on what to do when it shuts machine down.
As per instructions I disconnect my DVD drive and original "C" drive,
and connect the new "target" drive to the third master channel and reboot. The machine posts,
begins to load windows, then displays my desktop
minus ALL icons and buttons.
Any suggestions are appreciated, tia, rbm
Click to expand...

Use True Image.
 
Thanks for the reply. I was looking into True Image and on the Acronis
website I saw they had a trial version of Migrate Easy, which I downloaded
and tried, and got nowhere, so I became skeptical of TI as well
 
Just wanted to let you know, I just downloaded a trial version of TI and
tried it on the machine. It worked flawlessly, Thanks
 
RBM said:
Just wanted to let you know, I just downloaded a trial version of TI and tried it on the machine.
It worked flawlessly, Thanks
Click to expand...

No problem, thanks for the feedback with your config.
 
Back
Top