Guide+ updated last week.

  • Thread starter Thread starter Gordon Scott
  • Start date Start date
Gordon said:
my version 1.0.0.33 was updated to .55 I think it was.
Click to expand...

Don't know the numbers but it fixed the record problem,
I was having.

Does anyone know where it's (the upgrade) at on the hard drive?

Would like to save it.

randy
 
Gordon Scott said:
my version 1.0.0.33 was updated to .55 I think it was.
Click to expand...

I have 1.0.0.54 and the Update Wizard didn't find anything new. Is there
any other way to update?

Tom Lake
 
Gordon said:
my version 1.0.0.33 was updated to .55 I think it was.
Click to expand...

All I know is that this update corrected the tv not being seen in the
guide+ window.
Previously (with this mmc install)I couldnt get the tv into that little
left hand window, in the listings area.

Gordon
 
Gordon Scott said:
All I know is that this update corrected the tv not being seen in the
guide+ window.
Previously (with this mmc install)I couldnt get the tv into that little
left hand window, in the listings area.

Gordon
Click to expand...

..54 corrected that problem for me. What version do you actually have now?

Tom Lake
 
Tom said:
.54 corrected that problem for me. What version do you actually have now?

Tom Lake
Click to expand...

I have 1.0.0.54 on mmc 9.13 on a aiw x800xt
and 1.0.0.44 on mmc 9.02 (which wont update guide+ unless I update mmc)on
an 8500DV

Gordon
 
Gordon, what version of CAT are you using with your MMC
9.13? Is it 6.1? Is there some reason why you haven't
updated to MMC 9.14? I'm still hoping for an updated MMC
that will let you watch TV in a window WITHOUT recording to
the hard drive automatically. I want the OPTION for Record
on Demand, where you click a button to record, like I'm
getting now with MMC 9.03 on my X800XT.
Thanks.

Gary
============
 
gary said:
Gordon, what version of CAT are you using with your MMC
9.13? Is it 6.1? Is there some reason why you haven't
updated to MMC 9.14? I'm still hoping for an updated MMC
that will let you watch TV in a window WITHOUT recording to
the hard drive automatically. I want the OPTION for Record
on Demand, where you click a button to record, like I'm
getting now with MMC 9.03 on my X800XT.
Thanks.

Gary
============
Click to expand...

I use omega's drivers. This x800xt machine is a gaming/video rig. MMC has
always been a problem I hate it, I ONLY use the version that works best
for the things I want, upgrading MMC is a pain in the ass and I dont like
to take the chance that if something ****s up (like it usually does) I
might have to spend a day fixing it. I'm using omega 2.8.231 or cat 6.03.

I tweaked the registry with the value found in a thread here about
turning off the tv on demand auto recording, is that what your looking
for?
Gordon
 
Gordon, thanks for the reply. When I start the TV program
using MMC 9.03, there is a TV-ON-DEMAND button on the
console below the TV. It DOES NOT AUTOMATICALLY start to
record to the hard drive when you watch TV. You have to
CLICK the button for it to START/STOP recording.

The newer versions of MMC, from what I understand, DO NOT
give you this option. They will AUTOMATICALLY start
recording to the hard drive, ANY and EVERY TIME you start
the TV (i.e., watching TV in a window while you work, etc.).
Then you have to open Windows Explorer, and find all those
little clips that were recorded, but you don't want, just
because you wanted to watch a little TV while you worked, or
just wanted to check something quick on TV, like the weather
or the news.

I heard ATI was working on a version of MMC that would
RESTORE the TV-ON-DEMAND button, and have it work like it
does with version 9.03.

My question was, does the very latest version of MMC ALWAYS
RECORD on hard drive when you start the TV, or does it give
you the option, like MMC 9.03, where you click the
TV-ON-DEMAND button to record? Thanks.

Gary
==============
 
gary said:
Gordon, thanks for the reply. When I start the TV program
using MMC 9.03, there is a TV-ON-DEMAND button on the
console below the TV. It DOES NOT AUTOMATICALLY start to
record to the hard drive when you watch TV. You have to
CLICK the button for it to START/STOP recording.

The newer versions of MMC, from what I understand, DO NOT
give you this option. They will AUTOMATICALLY start
recording to the hard drive, ANY and EVERY TIME you start
the TV (i.e., watching TV in a window while you work, etc.).
Then you have to open Windows Explorer, and find all those
little clips that were recorded, but you don't want, just
because you wanted to watch a little TV while you worked, or
just wanted to check something quick on TV, like the weather
or the news.

I heard ATI was working on a version of MMC that would
RESTORE the TV-ON-DEMAND button, and have it work like it
does with version 9.03.

My question was, does the very latest version of MMC ALWAYS
RECORD on hard drive when you start the TV, or does it give
you the option, like MMC 9.03, where you click the
TV-ON-DEMAND button to record? Thanks.

Gary
==============
Click to expand...

well i dont use the very last version I'm using 9.13 and as i mentioned,
use the registry tweak to disable the auto record.
 
Back
Top