Ghosting an existing RAID array

  • Thread starter Thread starter mbube
  • Start date Start date
Thanks. No prob. I'll also appreciate if you can give me
the instructions on how to do it with a Hardare RAID.
 
Personnaly I've allways used the mirror array setup, with this though two
disks are used, they are seen as one by the sys, therefore ghosting is used
in its default config for the single disk.
Must admit I understood raid5 to have a form of disk redundancy by default,
ie it was possible to exhange a disk and the array would be rebuilt, without
lose
 
Back
Top