If your installation of Windows XP was from a CD, you will be prompted to
insert the CD and may need to browse to the i386 Folder so the installation
routine can find the necessary files. If your installation files are on the
hard drive, you may need to direct the routine to the i386 Folder there. If
you have applied SP1, these files may have been moved to a different folder
(ServicePackFiles\i386), and you will need to direct the routine to that
folder.
If your installation was performed by an OEM (original equipment
manufacturer), it will be the responsibility of the OEM to supply those
files. Unfortunately, the installation disks supplied by many OEM's do not
contain the necessary files and you will need to contact the OEM to obtain
them. The fax installation files are not available to download from
Microsoft.
When the installation routine is unable to find the necessary installation
files (even when directed to the appropriate i386 Folder) it usually means
that the installation files are compressed. This is often the case when the
files are pre-copied by a manufacturer on the hard drive. If you do a search
for the files that the installation routine claims are missing (fxsapi.dll
and fxcfgwz.dll) you won't find them, but you will find fxsapi.dl_ and
fxcfgwz.dl_. These are compressed DLL files and will need to be
decompressed. Double click on them and you will get a prompt for the file to
use to open them. Click on BROWSE. and select Win32 Cabinet Self-Extractor,
which is in the system folder. With any luck it will uncompress them all and
make them visible as DLL files. The install routine still may not find these
files. If so, then you must manually direct the installation routine to the
i386 folder that contains these extracted files.
