GeForce 3 Ti200 fro Leadtek : AGP 4x 1.5v compatible?

  • Thread starter Thread starter Bruno
  • Start date Start date
B

Bruno

Hi,

I have a GeForce 3 Ti 200 from Leadtek. It's a 2x/4x AGP card (as the
pins show). I'm wondering if the card will be OK on a AGP 4x card like
the ones for Pentium 4s... Will its voltage fit the 1.5v requirement?

I couldn't find anything on Leadtek's site...

TIA!
Bruno
 
Hi,

I have a GeForce 3 Ti 200 from Leadtek. It's a 2x/4x AGP card (as the
pins show). I'm wondering if the card will be OK on a AGP 4x card like
the ones for Pentium 4s... Will its voltage fit the 1.5v requirement?

I couldn't find anything on Leadtek's site...

TIA!
Bruno
Click to expand...

Yes, it's compatible.



Dave
 
kony said:
Yes, it's compatible.



Dave
Click to expand...

Thanks for the confirmation!
On a side note, is a 300W PSU enough for a Pentium 4 mobo with
LAN/Audio/USB2/Firewire included, given that there will also be the
usual set of 2 cd drives and 2 hard drives...? This PSU is currently
running fine, but with a Athlon 1800+ and the related mobo.

Bruno
 
Thanks for the confirmation!
On a side note, is a 300W PSU enough for a Pentium 4 mobo with
LAN/Audio/USB2/Firewire included, given that there will also be the
usual set of 2 cd drives and 2 hard drives...? This PSU is currently
running fine, but with a Athlon 1800+ and the related mobo.
Click to expand...

It depends on the power supply. I would expect a 300W to be fine in a
decent name-brand model, but you're making a shift from using
primarily 5V power to using primarily 12V, so it need support a fairly
high amperage on the 12V rail, and it harder to speculate about since
the current system is a different load. Try it, check voltages, run
stability tests, etc.


Dave
 
Back
Top