Future Domain TMC-1610MEX driver needed!

  • Thread starter Thread starter Johannes S.
  • Start date Start date
J

Johannes S.

I need a driver for my Future Domain TMC-1610MEX to use in WindowsXP
Anny one know where i can get one?

I mighte even be able to use a Win2k driver, the problem is that i can't
find drivers for it.
 
Hello

You can try doing a search on google.com or go driverguide.com
another option would be to go to the maker of that product website
and see if they provide any drivers for it

Alvin
 
Alvin Brown said:
Hello

You can try doing a search on google.com or go driverguide.com
another option would be to go to the maker of that product website
and see if they provide any drivers for it

Alvin
Click to expand...
Future Domain is made by Adaptec or something, but they does not support the
card anny longer, can't find annything on google or driverguide for winxp/2k
 
Hello

Well sounds like your pretty much out of luck with
that product, guess at this point you will have to replace
it with somethign else since you can not find any drivers.

Al
 
Drivers for the TMC-1610M are available in the obsolete section of the
Adaptec website (work on M, ME, MEX). Obviously they are NOT XP certified
drivers. You will however, be able to use the driver to interface your scsi
devices (install from a floppy, as an additional scsi driver), but will have
to ignore all of the warnings about non-certified drivers and getting
certified replacements from your manufacturer (don't hold your
breath--Adaptec is among the best of companies for, at least, making old
drivers available on their web site, but they can't be expected to revise
drivers for obsolete hardware)

My FD 1680 driver hangs in XP when the attached Scanjet is turned off. I
don't know or care why. (The scsi hd works fine.) If you want to use an
antique card, you have to take a few knocks (or write your own driver).
 
Found the card listed under the obsoltet section, but there is no driver
download for annything else than SCO unix and the Future Domain's SCSI
Device Analyzer as far as i can see.

http://www.adaptec.com/worldwide/support/drivers_by_product.html?sess=no&lan
guage=English+US&cat=/Product/TMC-1610M#Bios


Allan D. Foodym said:
Drivers for the TMC-1610M are available in the obsolete section of the
Adaptec website (work on M, ME, MEX). Obviously they are NOT XP certified
drivers. You will however, be able to use the driver to interface your scsi
devices (install from a floppy, as an additional scsi driver), but will have
to ignore all of the warnings about non-certified drivers and getting
certified replacements from your manufacturer (don't hold your
breath--Adaptec is among the best of companies for, at least, making old
drivers available on their web site, but they can't be expected to revise
drivers for obsolete hardware)

My FD 1680 driver hangs in XP when the attached Scanjet is turned off. I
don't know or care why. (The scsi hd works fine.) If you want to use an
antique card, you have to take a few knocks (or write your own driver).
Click to expand...
 
Back
Top