front panel to motherboard connectors

  • Thread starter Thread starter millt
  • Start date Start date
M

millt

I have bought an aspire q-pack mATX pc case.
moved everything into the case & connected everything up ok.
when connecting the front panel connections, the Power LED connection
from the front panel has the normal 2 wire connection , but housed in
a 3 pin connector, so the wires are on the edges of the connector(a
bit like the case speaker connection.
How do I connect to my motherboard as the Power LED is the normal 2
pin connection required.do I take the wires from the 3 pin connector &
just connect separately, or is there some kind of adaptor needed.

Hope this makes sense

TIA
 
I have bought an aspire q-pack mATX pc case.
moved everything into the case & connected everything up ok.
when connecting the front panel connections, the Power LED connection
from the front panel has the normal 2 wire connection , but housed in
a 3 pin connector, so the wires are on the edges of the connector(a
bit like the case speaker connection.
How do I connect to my motherboard as the Power LED is the normal 2
pin connection required.do I take the wires from the 3 pin connector &
just connect separately, or is there some kind of adaptor needed.

Hope this makes sense

TIA
Click to expand...
Normally you can move one of the wires to the center socket
so it becomes a 2 pin. There is usually a slot on the side of the connector
into which the pin clicks.
 
Back
Top