Fixed! Remote Desktop Connection (RDC) SLOW/NO Connection Issue

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

http://blog.tmcnet.com/blog/tom-keating/microsoft/remote-desktop-slow-problem-solved.asp

In the above-mentioned article, Tom Keating describes how he has found the
issue in Windows Vista which causes Remote Desktop Connection (RDC) to either
fail to connect, or operate extremely slow.

In my experiences, I was trying to connect to Windows 2003 Server and
Windows XP based systems from my Windows Vista (Home Premium) operating
system using RDC. Each time I would try, the connection would stop
completely after opening the window and drawing a small portion of my remote
system's desktop.

After searching the internet for over an hour, I found Mr. Keating's article
and executed the following instructions:

1) Open Command Prompt (START - PROGRAMS - ACCESSORIES - COMMAND PROMPT) as
an Administrator by right-clicking on Command Prompt.

2) Type: netsh interface tcp set global autotuninglevel=disabled

This command disables TCP Auto Tuning which is the cause of this particular
problem. To re-enable it, execute the following:

1) Open Command Prompt (START - PROGRAMS - ACCESSORIES - COMMAND PROMPT) as
an Administrator by right-clicking on Command Prompt.

2) Type: netsh interface tcp set global autotuninglevel=normal

If you're technically savvy, there's much more to this issue (fine tuning
the problem, etc), so I recommend reading this article in Mr. Keating's blog.
But for the layman, this quick fix will solve the problem of not being able
to connect to <Vista Operating Systems.

And to Microsoft - recognize this problem and PUT A SOLUTION IN THE
KNOWLEDGEBASE!

Enjoy and good luck!
 
Logon administrator is not good enough. You need to run elevation command
prompt. This link may help.

netsh commandSet command failed requested operation requires elevation.
Netsh is a command-line scripting utility that allows you to, either locally
or remotely, ...
www.chicagotech.net/netsh.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
 
=?Utf-8?B?cDB3ZXJ0ZWNo?= said:
http://blog.tmcnet.com/blog/tom-keating/microsoft/remote-desktop-slow-problem-solved.asp

In the above-mentioned article, Tom Keating describes how he has found the
issue in Windows Vista which causes Remote Desktop Connection (RDC) to either
fail to connect, or operate extremely slow.

In my experiences, I was trying to connect to Windows 2003 Server and
Windows XP based systems from my Windows Vista (Home Premium) operating
system using RDC. Each time I would try, the connection would stop
completely after opening the window and drawing a small portion of my remote
system's desktop.
Click to expand...


Why are you lying? netsh.exe is only available for Windows 2008, not for Windows XP.
 
Back
Top