C
Chris Hugill \(MS\)
Hi Andrew,
To see if your 1394 card did install, launch the Windows Control Panel
and go into the System option. Then select the Hardware tab at the top of
this System Properties window. Of the buttons then displayed, click on
Device Manager and the Device Manager window will appear. If your 1394 card
installed correctly then you should see an entry titled "IEEE 1394 Bus host
controllers".
If you don't have that entry then it means that the card was not installed.
So to try to fix that, close the Device Manager window and select the Add
Hardware Wizard button on the Hardware page of the System Properties window.
Follow the steps in the wizard to install your 1394 card.
Thanks,
Chris.
To see if your 1394 card did install, launch the Windows Control Panel
and go into the System option. Then select the Hardware tab at the top of
this System Properties window. Of the buttons then displayed, click on
Device Manager and the Device Manager window will appear. If your 1394 card
installed correctly then you should see an entry titled "IEEE 1394 Bus host
controllers".
If you don't have that entry then it means that the card was not installed.
So to try to fix that, close the Device Manager window and select the Add
Hardware Wizard button on the Hardware page of the System Properties window.
Follow the steps in the wizard to install your 1394 card.
Thanks,
Chris.