Firewall access

  • Thread starter Thread starter Dean
  • Start date Start date
D

Dean

Hi,..

I have a Citrix server on one subnet seperated by a
firewall that talks to a DC and domain member servers.
At the moment I can TS into the domain servers on the
other subnet from my Citrix (to be) server. I can also map
drives to these servers.

DNS UDP port 53 is open for DNS traffics and I can do
NSlookups,...fine.

What I can't do is add this citrix server to it's relevant
domain,.. I know their are additional ports to open u for
this to happen.
Does anyone know which ones...?
 
netbios ports....

135, 138, 139

does the citrix sever point to a DNS server that has knowledge of the domain
controller?

NuTs
 
Citrix server point to DNS that is also the DC on the
other subnet.

I take it that the ports need to be opened at both ends
for traffic/authentication to flow both ways.

Thanks for your post
 
you could get jiggy with an IPsec policy between the two servers, so that
the taffic is secured and then your router config is simplified.

NuTs
 
Back
Top