filter resource method

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I am trying to recover interrupt 7 from the parallel port. When I go to
Device Manager->Ports->LPT1->Properties->Port Settings and choose use any
interrupt assigned to the port the setting in not serialized. That is when I
return to the dialog the setting is back to the radio button do not use an
interrupt. In xp pro this is not the case.

Can you tell me which components I will need to aquire this functionality?

Eric
 
additional information:
I found in a posting in 2003 the same problem here is the definition:

With the "Printer Port" component added the port is there, but
apparently as a standard parallel port only, and I can't get it to
hold the interrupt setting: it always switches back to "never use" by
itself (without even a reboot: just close and re-enter the port
properties in device manager, and the setting is back off again).
[ISTR that the latter is something that can happen in a minlogon
configuration, but this is winlogon]

How do you get xpe to remember and use the interrupt setting for the lpt port?
 
Back
Top