sue said:
hi
I have just put in a new hard drive and want to transfer files and settings
as I want to keep the look of my previous drive. I have no other machine to
use the transfer wizard is there any other way I can do this.
Any help would be gratefully recieved.
Thanks once again
Sue
Presumably you still have the old hard drive available. Temporarily
put it back into the machine and disconnect the new drive, also
temporarily.
Boot the computer, create a new folder named \Transfer in the root
directory, and run FASTW telling it to save the data in the
c:\transfer folder you just created.
Shut down the computer, reconnect the new hard drive and install
Windows XP on it if you have not already done so. Then shut down
again and connect the old hard drive, again temporarily, as the
secondary IDE master drive. On most machines you would use the data
cable (and power connector) from the CDROM/DVD drive for this.
Boot again into your newly installed XP and run FASTW, telling it to
import the data from your old hard drive, which will now probably be
using drive letter D: so you would point FASTW at the d;\transfer
folder.
Note that the above procedure will get you the user data files and
configuration settings only. If you want the installed applications
as well then you need to go to the hard drive manufacturer's web site
and download their free disk cloning utility. That should also
include detailed instructions on how to use it.
Good luck
Ron Martell Duncan B.C. Canada