FastStone problem on printing?

  • Thread starter Thread starter dkb
  • Start date Start date
D

dkb

In FastStone Image Viewer 2.29, I tried to print the image after fixing
the size 2"X 2" and the the resultant printout is only 2"X1.5" why it
should be like this please?
<[email protected]> does not respond.
Any comment please?
Thanking you in advance.
dkb
 
Is the source image square? I would expect the print to maintain aspect ratio
-- perhaps you could try cropping the image first (if it isn't square
already)?
 
Rowland said:
Is the source image square? I would expect the print to maintain aspect ratio
-- perhaps you could try cropping the image first (if it isn't square
already)?

:
Click to expand...
Is there any way one could crop a perfect square while selection ----say
Irfanview shows the size in the status bar after the crop----and with
FastStone I do not know how to draw a prefect square even though the
croping area is directly visible -----width aand height is of never the
same size. I may be doing wrong---please comment on this.
dkb
 
dkb said:
Is there any way one could crop a perfect square while selection ----say
Irfanview shows the size in the status bar after the crop----and with
FastStone I do not know how to draw a prefect square even though the
croping area is directly visible -----width aand height is of never the
same size. I may be doing wrong---please comment on this.
dkb
Click to expand...

You can manually select the 'size' of the crop by draggiung the handles on
the cop outline box.
 
dkb said:
Is there any way one could crop a perfect square while
selection ----say Irfanview shows the size in the status
bar after the crop----and with FastStone I do not know
how to draw a prefect square even though the croping area
is directly visible -----width aand height is of never
the same size. I may be doing wrong---please comment on
this.
dkb
Click to expand...
==================================
You can add any size you like to the
crop tool in FastStone.

With your image selected in Fast Stone...
go to...Edit / Crop Board.

Click the "Define Paper Ratios" button.
(it's just to the right of the Paper Ratio
drop window)

Click the "Add" button and enter any
size you require.

Open the "Paper Ratio" drop window
and select your new size.

Now...crop the image.

--

John Inzer
MS Picture It! MVP
How to ask a newsgroup question:
http://support.microsoft.com/kb/555375
 
John said:
==================================
You can add any size you like to the crop tool in FastStone.

With your image selected in Fast Stone...
go to...Edit / Crop Board.

Click the "Define Paper Ratios" button.
(it's just to the right of the Paper Ratio drop window)

Click the "Add" button and enter any
size you require.

Open the "Paper Ratio" drop window and select your new size.

Now...crop the image.
Click to expand...
Thanks for the guidance.
dkb
 
Back
Top