Fast user switching will not work properly

  • Thread starter Thread starter Shane
  • Start date Start date
S

Shane

When I try to switch to my guest account the desktop will not load. I tried
restarting my computer and then accessed the guest account, but when I tried
to go into my account it would not load. It seems that I can only access one
account and then have to restart to access the other one. Help me Please!
 
I clicked on the link you gave me and ran it. I then restarted my computer
and I still cannot log into the guest user once I have logged into my own
user name. Any other ideas?
 
Shane
What happen you click Start >> Control panel >> User accounts and there make
click on the option for:
Change the way users Log Onor Off
Check both check boxes for :
[ ] Use welcome screen
[ ] Use fast user switching

Out and reboot your machine, does it help?
If that didn't help then I guess you have a profile corruption so try to
create a new one and test, does it work?

How to Identify a Damaged User Profile and Create a New Profile
http://support.microsoft.com/kb/811151
 
I had already created another user name and the same thing happens, when you
click on it to logoin it acts like it will do so but then returns back to the
login screen.

nass said:
Shane
What happen you click Start >> Control panel >> User accounts and there make
click on the option for:
Change the way users Log Onor Off
Check both check boxes for :
[ ] Use welcome screen
[ ] Use fast user switching

Out and reboot your machine, does it help?
If that didn't help then I guess you have a profile corruption so try to
create a new one and test, does it work?

How to Identify a Damaged User Profile and Create a New Profile
http://support.microsoft.com/kb/811151

Shane said:
I clicked on the link you gave me and ran it. I then restarted my computer
and I still cannot log into the guest user once I have logged into my own
user name. Any other ideas?
Click to expand...
Click to expand...
 
Have a look in the Event Viewer and send us the error messages you will see
there in your next post:
Open a Notepad, customize or minimize to the taskbar as you will need it
later for this step to copy the error message on it.
Open a run command and type in:
eventvwr.msc click [OK] you will get the Event viewer control Panel.
click on each of these:
Application
System
Security
Look in the right Pane/window for error message with red (X) or Yellow
exclamation mark /!\ , double click each one to get more info about the
causer.
On the Event error properties message you will see:
Up Arrow
Down arrow
Two pages
Click on the two pages to copy the error message then bring up the Notepad
you opened earlier and right click on the first line and select Paste from
the list, this will paste the error message on a Notepad.
Please don't duplicate the error message one of each kind will be sufficient.
HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
http://support.microsoft.com/kb/308427/en-us

Please we need just the error messages with Red (X) and don't repeat the
error, just one of each kind and post them back in your next post.

HTH,
nass
---
http://www.nasstec.co.uk

Shane said:
I had already created another user name and the same thing happens, when you
click on it to logoin it acts like it will do so but then returns back to the
login screen.

nass said:
Shane
What happen you click Start >> Control panel >> User accounts and there make
click on the option for:
Change the way users Log Onor Off
Check both check boxes for :
[ ] Use welcome screen
[ ] Use fast user switching

Out and reboot your machine, does it help?
If that didn't help then I guess you have a profile corruption so try to
create a new one and test, does it work?

How to Identify a Damaged User Profile and Create a New Profile
http://support.microsoft.com/kb/811151

Shane said:
I clicked on the link you gave me and ran it. I then restarted my computer
and I still cannot log into the guest user once I have logged into my own
user name. Any other ideas?

:



:

When I try to switch to my guest account the desktop will not load. I tried
restarting my computer and then accessed the guest account, but when I tried
to go into my account it would not load. It seems that I can only access one
account and then have to restart to access the other one. Help me Please!

Restore Fast User Switching
http://www.kellys-korner-xp.com/regs_edits/fus.reg
HTH,
nass
Click to expand...
Click to expand...
Click to expand...
 
How far back should I go?

nass said:
Have a look in the Event Viewer and send us the error messages you will see
there in your next post:
Open a Notepad, customize or minimize to the taskbar as you will need it
later for this step to copy the error message on it.
Open a run command and type in:
eventvwr.msc click [OK] you will get the Event viewer control Panel.
click on each of these:
Application
System
Security
Look in the right Pane/window for error message with red (X) or Yellow
exclamation mark /!\ , double click each one to get more info about the
causer.
On the Event error properties message you will see:
Up Arrow
Down arrow
Two pages
Click on the two pages to copy the error message then bring up the Notepad
you opened earlier and right click on the first line and select Paste from
the list, this will paste the error message on a Notepad.
Please don't duplicate the error message one of each kind will be sufficient.
HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
http://support.microsoft.com/kb/308427/en-us

Please we need just the error messages with Red (X) and don't repeat the
error, just one of each kind and post them back in your next post.

HTH,
nass
---
http://www.nasstec.co.uk

Shane said:
I had already created another user name and the same thing happens, when you
click on it to logoin it acts like it will do so but then returns back to the
login screen.

nass said:
Shane
What happen you click Start >> Control panel >> User accounts and there make
click on the option for:
Change the way users Log Onor Off
Check both check boxes for :
[ ] Use welcome screen
[ ] Use fast user switching

Out and reboot your machine, does it help?
If that didn't help then I guess you have a profile corruption so try to
create a new one and test, does it work?

How to Identify a Damaged User Profile and Create a New Profile
http://support.microsoft.com/kb/811151

:

I clicked on the link you gave me and ran it. I then restarted my computer
and I still cannot log into the guest user once I have logged into my own
user name. Any other ideas?

:



:

When I try to switch to my guest account the desktop will not load. I tried
restarting my computer and then accessed the guest account, but when I tried
to go into my account it would not load. It seems that I can only access one
account and then have to restart to access the other one. Help me Please!

Restore Fast User Switching
http://www.kellys-korner-xp.com/regs_edits/fus.reg
HTH,
nass
Click to expand...
Click to expand...
Click to expand...
 
Hope I did this right.

Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1001
Date: 10/2/2008
Time: 7:20:43 PM
User: N/A
Computer: 696908E74163425
Description:
Fault bucket 500365911.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 42 75 63 6b 65 74 3a 20 Bucket:
0008: 35 30 30 33 36 35 39 31 50036591
0010: 31 0d 0a 1..


Event Type: Error
Event Source: Application Hang
Event Category: None
Event ID: 1001
Date: 9/29/2008
Time: 8:36:24 PM
User: N/A
Computer: 696908E74163425
Description:
Fault bucket 502380885.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 42 75 63 6b 65 74 3a 20 Bucket:
0008: 35 30 32 33 38 30 38 38 50238088
0010: 35 0d 0a 5..


Event Type: Error
Event Source: MsiInstaller
Event Category: None
Event ID: 11706
Date: 9/27/2008
Time: 4:35:05 PM
User: 696908E74163425\Shane Gorgen
Computer: 696908E74163425
Description:
Product: Microsoft Office 2000 SR-1 Professional -- Error 1706. No valid
source could be found for product Microsoft Office 2000 SR-1 Professional.
The Windows installer cannot continue.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 7b 30 30 30 31 30 34 30 {0001040
0008: 39 2d 37 38 45 31 2d 31 9-78E1-1
0010: 31 44 32 2d 42 36 30 46 1D2-B60F
0018: 2d 30 30 36 30 39 37 43 -006097C
0020: 39 39 38 45 37 7d 998E7}


Event Type: Error
Event Source: EventSystem
Event Category: (50)
Event ID: 4614
Date: 9/24/2008
Time: 11:52:07 PM
User: N/A
Computer: 696908E74163425
Description:
The COM+ Event System detected an inconsistency in its internal state. The
assertion "GetLastError() == 122L" failed at line 162 of
d:\comxp_sp3\com\com1x\src\events\shared\sectools.cpp. Please contact
Microsoft Product Support Services to report this error.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.


Event Type: Error
Event Source: Windows Search Service
Event Category: Gatherer
Event ID: 3013
Date: 9/24/2008
Time: 11:45:34 PM
User: N/A
Computer: 696908E74163425
Description:
The entry <C:\DOCUMENTS AND SETTINGS\SHANE GORGEN\MY DOCUMENTS LAPTOP\MY
PICTURES\2008-09 (SEP)\CIMG0070H COPY2.JPG> in the hash map cannot be updated.

Context: Application, SystemIndex Catalog

Details:
A device attached to the system is not functioning. (0x8007001f)


For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

Event Type: Error
Event Source: Windows Search Service
Event Category: Gatherer
Event ID: 3013
Date: 9/10/2008
Time: 10:05:54 PM
User: N/A
Computer: 696908E74163425
Description:
The entry <C:\CONFIG.MSI\948CE0.RBF> in the hash map cannot be updated.

Context: Application, SystemIndex Catalog

Details:
A device attached to the system is not functioning. (0x8007001f)


For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.


Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7001
Date: 10/4/2008
Time: 1:03:34 PM
User: N/A
Computer: 696908E74163425
Description:
The Windows Search service depends on the Terminal Services service which
failed to start because of the following error:
The executable program that this service is configured to run in does not
implement the service.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.


Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10005
Date: 10/4/2008
Time: 12:58:33 PM
User: 696908E74163425\Shane Gorgen
Computer: 696908E74163425
Description:
DCOM got error "The dependency service or group failed to start. "
attempting to start the service WSearch with arguments "" in order to run the
server:
{7D096C5F-AC08-4F1F-BEB7-5C22C517CE39}

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7001
Date: 9/29/2008
Time: 11:24:42 PM
User: N/A
Computer: 696908E74163425
Description:
The Windows Search service depends on the Terminal Services service which
failed to start because of the following error:
The executable program that this service is configured to run in does not
implement the service.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.


Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 9/28/2008
Time: 1:28:55 PM
User: N/A
Computer: 696908E74163425
Description:
Error code 0000009c, parameter1 00000001, parameter2 80546df0, parameter3
f2000000, parameter4 00000175.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 39 0000009
0020: 63 20 20 50 61 72 61 6d c Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 30 31 2c 20 000001,
0038: 38 30 35 34 36 64 66 30 80546df0
0040: 2c 20 66 32 30 30 30 30 , f20000
0048: 30 30 2c 20 30 30 30 30 00, 0000
0050: 30 31 37 35 0175

Event Type: Error
Event Source: Print
Event Category: None
Event ID: 6161
Date: 8/26/2008
Time: 10:35:30 PM
User: 696908E74163425\Shane Gorgen
Computer: 696908E74163425
Description:
The document http://us.mg3.mail.yahoo.com/dc/launch?.rand=fa3rbaam7le9u
owned by Shane Gorgen failed to print on printer HP Officejet J6400 series.
Data type: NT EMF 1.008. Size of the spool file in bytes: 131072. Number of
bytes printed: 0. Total number of pages in the document: 1. Number of pages
printed: 0. Client machine: \\696908E74163425. Win32 error code returned by
the print processor: 6 (0x6).

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.


Event Type: Error
Event Source: Disk
Event Category: None
Event ID: 11
Date: 8/25/2008
Time: 11:19:31 AM
User: N/A
Computer: 696908E74163425
Description:
The driver detected a controller error on \Device\Harddisk2\D.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 0f 00 68 00 01 00 b6 00 ..h...¶.
0008: 00 00 00 00 0b 00 04 c0 .......À
0010: 03 01 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: 8d 8b 1d 00 00 00 00 00 ‹......
0030: ff ff ff ff 06 00 00 00 ÿÿÿÿ....
0038: 40 00 00 00 00 00 00 00 @.......
0040: ff 20 06 12 08 01 30 10 ÿ ....0.
0048: 00 00 00 00 14 00 00 00 ........
0050: 00 00 00 00 58 02 92 8a ....X.’Š
0058: 00 00 00 00 08 a0 6c 8a ..... lŠ
0060: 00 00 00 00 00 00 00 00 ........
0068: 00 00 00 00 00 00 00 00 ........
0070: 00 00 00 00 00 00 00 00 ........
0078: 00 00 00 00 00 00 00 00 ........
0080: 00 00 00 00 00 00 00 00 ........
0088: 00 00 00 00 00 00 00 00 ........

Event Type: Error
Event Source: Dhcp
Event Category: None
Event ID: 1002
Date: 8/22/2008
Time: 7:05:24 PM
User: N/A
Computer: 696908E74163425
Description:
The IP address lease 192.168.1.100 for the Network Card with network address
0012F0679F25 has been denied by the DHCP server 0.0.0.0 (The DHCP Server sent
a DHCPNACK message).

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
 
You can't use Fast User Switching because Terminal Services is not
running. Enter Services.msc in the Start Menu Run box and verify that
Terminal Services is set to Automatic Start.

John
 
When I tried to start it there was an error message. "Could not start the
Terminal Services service on Local Computer. Error 1083: The executable
program that this service is confirgured to run in does not implement the
service." I tried restarting the computer and went back to terminal services
and hit start, it still will not start.

Shane said:
How far back should I go?

nass said:
Have a look in the Event Viewer and send us the error messages you will see
there in your next post:
Open a Notepad, customize or minimize to the taskbar as you will need it
later for this step to copy the error message on it.
Open a run command and type in:
eventvwr.msc click [OK] you will get the Event viewer control Panel.
click on each of these:
Application
System
Security
Look in the right Pane/window for error message with red (X) or Yellow
exclamation mark /!\ , double click each one to get more info about the
causer.
On the Event error properties message you will see:
Up Arrow
Down arrow
Two pages
Click on the two pages to copy the error message then bring up the Notepad
you opened earlier and right click on the first line and select Paste from
the list, this will paste the error message on a Notepad.
Please don't duplicate the error message one of each kind will be sufficient.
HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
http://support.microsoft.com/kb/308427/en-us

Please we need just the error messages with Red (X) and don't repeat the
error, just one of each kind and post them back in your next post.

HTH,
nass
---
http://www.nasstec.co.uk

Shane said:
I had already created another user name and the same thing happens, when you
click on it to logoin it acts like it will do so but then returns back to the
login screen.

:


Shane
What happen you click Start >> Control panel >> User accounts and there make
click on the option for:
Change the way users Log Onor Off
Check both check boxes for :
[ ] Use welcome screen
[ ] Use fast user switching

Out and reboot your machine, does it help?
If that didn't help then I guess you have a profile corruption so try to
create a new one and test, does it work?

How to Identify a Damaged User Profile and Create a New Profile
http://support.microsoft.com/kb/811151

:

I clicked on the link you gave me and ran it. I then restarted my computer
and I still cannot log into the guest user once I have logged into my own
user name. Any other ideas?

:



:

When I try to switch to my guest account the desktop will not load. I tried
restarting my computer and then accessed the guest account, but when I tried
to go into my account it would not load. It seems that I can only access one
account and then have to restart to access the other one. Help me Please!

Restore Fast User Switching
http://www.kellys-korner-xp.com/regs_edits/fus.reg
HTH,
nass
Click to expand...
Click to expand...
Click to expand...
 
Try here:
http://www.winhelponline.com/articl...-in-a-Windows-XP-Service-Pack-2-computer.html

John
When I tried to start it there was an error message. "Could not start the
Terminal Services service on Local Computer. Error 1083: The executable
program that this service is confirgured to run in does not implement the
service." I tried restarting the computer and went back to terminal services
and hit start, it still will not start.

:

How far back should I go?

:

Have a look in the Event Viewer and send us the error messages you will see
there in your next post:
Open a Notepad, customize or minimize to the taskbar as you will need it
later for this step to copy the error message on it.
Open a run command and type in:
eventvwr.msc click [OK] you will get the Event viewer control Panel.
click on each of these:
Application
System
Security
Look in the right Pane/window for error message with red (X) or Yellow
exclamation mark /!\ , double click each one to get more info about the
causer.
On the Event error properties message you will see:
Up Arrow
Down arrow
Two pages
Click on the two pages to copy the error message then bring up the Notepad
you opened earlier and right click on the first line and select Paste from
the list, this will paste the error message on a Notepad.
Please don't duplicate the error message one of each kind will be sufficient.
HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
http://support.microsoft.com/kb/308427/en-us

Please we need just the error messages with Red (X) and don't repeat the
error, just one of each kind and post them back in your next post.

HTH,
nass
---
http://www.nasstec.co.uk

:


I had already created another user name and the same thing happens, when you
click on it to logoin it acts like it will do so but then returns back to the
login screen.

:


Shane
What happen you click Start >> Control panel >> User accounts and there make
click on the option for:
Change the way users Log Onor Off
Check both check boxes for :
[ ] Use welcome screen
[ ] Use fast user switching

Out and reboot your machine, does it help?
If that didn't help then I guess you have a profile corruption so try to
create a new one and test, does it work?

How to Identify a Damaged User Profile and Create a New Profile
http://support.microsoft.com/kb/811151

:


I clicked on the link you gave me and ran it. I then restarted my computer
and I still cannot log into the guest user once I have logged into my own
user name. Any other ideas?

:



:


When I try to switch to my guest account the desktop will not load. I tried
restarting my computer and then accessed the guest account, but when I tried
to go into my account it would not load. It seems that I can only access one
account and then have to restart to access the other one. Help me Please!

Restore Fast User Switching
http://www.kellys-korner-xp.com/regs_edits/fus.reg
HTH,
nass
Click to expand...
Click to expand...
Click to expand...
 
I thought I had posted this last night, but I guess I did do it right. When I
changed the terminal service to automatic and his start an error message
comes up and it will not take. I also tried restarting and doing it again,
still didn't work. The error message read "Could not start the Terminal
Services service on local computer. Error 1083: The executable program that
this service is configured to run in does not implement the service." I am
running xp home version 2002 with service pack 3. Thank You for your
assistance.
 
The terminal services fix zip file worked. Yeah!! Thanks to the both of you I
really appreciate your help.
 
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1001
Date: 10/2/2008
Time: 7:20:43 PM
User: N/A
Computer: 696908E74163425
Description:
Fault bucket 500365911.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Event Type: Error
Event Source: Application Hang
Event Category: None
Event ID: 1001
Date: 9/29/2008
Time: 8:36:24 PM
User: N/A
Computer: 696908E74163425
Description:
Fault bucket 502380885.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Event Type: Error
Event Source: MsiInstaller
Event Category: None
Event ID: 11706
Date: 9/27/2008
Time: 4:35:05 PM
User: 696908E74163425\Shane Gorgen
Computer: 696908E74163425
Description:
Product: Microsoft Office 2000 SR-1 Professional -- Error 1706. No valid
source could be found for product Microsoft Office 2000 SR-1 Professional.
The Windows installer cannot continue.

Windows Installer prompts you for an Office 2000 CD, or you receive an
"Error 1706" error message
http://support.microsoft.com/kb/298385
"The feature you are trying to use is on a network resource that is
unavailable" or "Error 1706" error message when you use a feature that is set
to Installed on First Use
http://support.microsoft.com/kb/258847
The Setup program prompts you for the Office 2000 CD-ROM when you upgrade to
Office XP
http://support.microsoft.com/kb/839438

<Q>
Hello Partner,

Based on my experience, I assume that these users are using Office 2000 on
a Terminal Server, am I right?
If this is the case on your side, we can perform the following steps below
to resolve this problem:

Warning If you use Registry Editor incorrectly, you may cause serious
problems that may require you to reinstall your operating system. Microsoft
cannot guarantee that you can solve problems that result from using
Registry Editor incorrectly. Use Registry Editor at your own risk.

For Existing Users
===============
Follow these steps for each user who is experiencing the behavior:

1. Click Start, and then click Run.
2. In the Open box, type "Regedit" (without the quotation marks) and then
click OK.
3. Locate and select the following keys in the registry:

[HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Word]
[HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Common]
[HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Access]
[HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Excel]
[HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook]
[HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\PowerPoint]

4. On the Edit menu, point to New and then click DWORD Value.
5. With New Value #1 selected (highlighted), type "UserData" (without the
quotation marks) and then press ENTER.
6. Double-click UserData, type "1" (without the quotation marks) in the
Data Value box, and then click OK.

For Future Users
=================
To prevent this behavior for future users when they log on, follow these
steps:

1. Log on as an administrator of the computer.
2. Click Start, and then click Run.
3. In the Open box, type "Regedit" (without the quotation marks) and then
click OK.
4. Locate and select the following key in the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Terminal
Server\Install\Software\Microsoft\Office\9.0\Common

5. On the Edit menu, point to New and then click DWORD Value.
6. With New Value #1 selected, type "UserData" (without the quotation
marks) and then press ENTER.
7. Double-click UserData, type "1" (without the quotation marks) in the
Data Value box, and then click OK.
8. On the Edit menu, point to New, and then click DWORD Value.
9. With New Value #2 selected, type "OSAShortcut" (without the quotation
marks) and then press ENTER.
10. Double-click OSAShortcut, type "1" (without the quotation marks) in the
Data Value box, and then click OK.
11. Locate and select the following keys in the registry:

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Terminal
Server\Install\Software\MICROSOFT\Office\9.0\Word]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Terminal
Server\Install\Software\MICROSOFT\Office\9.0\Access]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Terminal
Server\Install\Software\MICROSOFT\Office\9.0\Excel]


[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Terminal
Server\Install\Software\MICROSOFT\Office\9.0\Outlook]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Terminal
Server\Install\Software\MICROSOFT\Office\9.0\PowerPoint]

12. For each of the keys above, on the Edit menu, point to New and then
click DWORD Value.
13. With New Value #1 selected, type "UserData" (without the quotation
marks) and then press ENTER.
14. Double-click UserData, type "1" (without the quotation marks) in the
Data Value box, and then click OK.
15. On the Registry menu, click Exit.

Hope this helps.

Jacky Gu

Microsoft Online Partner Support

When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.

=====================================================

Business-Critical Phone Support (BCPS) provides you with technical phone
support at no charge during critical LAN outages or "business down"
situations. This benefit is available 24 hours a day, 7 days a week to all
Microsoft technology partners in the United States and Canada.
</Q>

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Event Type: Error
Event Source: EventSystem
Event Category: (50)
Event ID: 4614
Date: 9/24/2008
Time: 11:52:07 PM
User: N/A
Computer: 696908E74163425
Description:
The COM+ Event System detected an inconsistency in its internal state. The
assertion "GetLastError() == 122L" failed at line 162 of
d:\comxp_sp3\com\com1x\src\events\shared\sectools.cpp. Please contact
Microsoft Product Support Services to report this error.


HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
T\CurrentVersion\Winlogon\Notify = what listed here?

Event ID 4614 — COM+ Event System General Functionality
http://technet.microsoft.com/en-us/library/cc774473.aspx

Availability of Windows XP COM+ Hotfix Rollup Package 14
http://support.microsoft.com/kb/922668

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Event Type: Error
Event Source: Windows Search Service
Event Category: Gatherer
Event ID: 3013
Date: 9/24/2008
Time: 11:45:34 PM
User: N/A
Computer: 696908E74163425
Description:
The entry <C:\DOCUMENTS AND SETTINGS\SHANE GORGEN\MY DOCUMENTS LAPTOP\MY
PICTURES\2008-09 (SEP)\CIMG0070H COPY2.JPG> in the hash map cannot be updated.

Context: Application, SystemIndex Catalog

Details:
A device attached to the system is not functioning. (0x8007001f)


HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsSearch\SetupCompletedSuccessfully =
what the value set to in the right pane? if it been set to 1 please change
to Zero "0"

The Error (0x8007001F) Is Generated When You Use Certain Video Capture Cards
http://support.microsoft.com/kb/319445

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Event Type: Error
Event Source: Windows Search Service
Event Category: Gatherer
Event ID: 3013
Date: 9/10/2008
Time: 10:05:54 PM
User: N/A
Computer: 696908E74163425
Description:
The entry <C:\CONFIG.MSI\948CE0.RBF> in the hash map cannot be updated.

Context: Application, SystemIndex Catalog

Details:
A device attached to the system is not functioning. (0x8007001f)


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7001
Date: 10/4/2008
Time: 1:03:34 PM
User: N/A
Computer: 696908E74163425
Description:
The Windows Search service depends on the Terminal Services service which
failed to start because of the following error:
The executable program that this service is configured to run in does not
implement the service.
Event 7000 Occurs When Attempting to Start Exchange Services
http://support.microsoft.com/kb/277770
You may receive an error message that contains the "0x8DDD0018" code or the
"0x80246008" code when you try to download updates from the Microsoft Windows
Update Web site or from the Microsoft Update Web site
http://support.microsoft.com/kb/910337

"Error 1083" when attempting to start Terminal Services service in a Windows
XP Service Pack 2 computer
http://www.winhelponline.com/articl...-in-a-Windows-XP-Service-Pack-2-computer.html

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10005
Date: 10/4/2008
Time: 12:58:33 PM
User: 696908E74163425\Shane Gorgen
Computer: 696908E74163425
Description:
DCOM got error "The dependency service or group failed to start. "
attempting to start the service WSearch with arguments "" in order to run the
server:
{7D096C5F-AC08-4F1F-BEB7-5C22C517CE39}

enabled index searches and reboot your machine and see if the issue resolved
and the error not being logged.

How to troubleshoot hibernation and standby issues in Windows XP
http://support.microsoft.com/kb/907477

<Optional Fixes>
Windows Search 4.0 for Windows XP (KB940157)
http://www.microsoft.com/downloads/...b3-c916-4298-aba3-5b98904f7cda&DisplayLang=en
</OP>

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7001
Date: 9/29/2008
Time: 11:24:42 PM
User: N/A
Computer: 696908E74163425
Description:
The Windows Search service depends on the Terminal Services service which
failed to start because of the following error:
The executable program that this service is configured to run in does not
implement the service.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 9/28/2008
Time: 1:28:55 PM
User: N/A
Computer: 696908E74163425
Description:
Error code 0000009c, parameter1 00000001, parameter2 80546df0, parameter3
f2000000, parameter4 00000175.
Error message in Windows XP: "STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER"
http://support.microsoft.com/kb/293078/EN-US/

motherboards, RAM, Malware
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Event Type: Error
Event Source: Print
Event Category: None
Event ID: 6161
Date: 8/26/2008
Time: 10:35:30 PM
User: 696908E74163425\Shane Gorgen
Computer: 696908E74163425
Description:
The document http://us.mg3.mail.yahoo.com/dc/launch?.rand=fa3rbaam7le9u
owned by Shane Gorgen failed to print on printer HP Officejet J6400 series.
Data type: NT EMF 1.008. Size of the spool file in bytes: 131072. Number of
bytes printed: 0. Total number of pages in the document: 1. Number of pages
printed: 0. Client machine: \\696908E74163425. Win32 error code returned by
the print processor: 6 (0x6).
Event ID 6161 — Print Spooler Status
http://technet.microsoft.com/en-us/library/cc773865.aspx
Improved reporting of Event ID 61 event messages to identify a print queue
or a print device
http://support.microsoft.com/kb/824339

Installing the HP All-in-One in a Wireless Network (Infrastructure Mode)
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=ru&cc=ru&product=61725&docname=c01312766
Frequently Asked Questions
http://h10025.www1.hp.com/ewfrf/wc/document?docname=npu03238&lc=en&cc=ru&dlc=ru&product=61725#N1362

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Event Type: Error
Event Source: Disk
Event Category: None
Event ID: 11
Date: 8/25/2008
Time: 11:19:31 AM
User: N/A
Computer: 696908E74163425
Description:
The driver detected a controller error on \Device\Harddisk2\D.

How to troubleshoot error messages about Event ID 9 and Event ID 11
http://support.microsoft.com/default.aspx?scid=kb;en-us;314093
http://forum.sysinternals.com/printer_friendly_posts.asp?TID=9246
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Event Type: Error
Event Source: Dhcp
Event Category: None
Event ID: 1002
Date: 8/22/2008
Time: 7:05:24 PM
User: N/A
Computer: 696908E74163425
Description:
The IP address lease 192.168.1.100 for the Network Card with network address
0012F0679F25 has been denied by the DHCP server 0.0.0.0 (The DHCP Server sent
a DHCPNACK message).
Make sure the DHCP enabled and dishing out IPs to your machine and also
enabled on your NIC card.
Event ID 1002 — DHCP Client Address Conflicts
http://technet.microsoft.com/en-us/library/cc726889.aspx
 
If you still want to fix the rest of the error please see my replies to your
Event Errors.

Glad to hear you get some progress.
HTH,
nass
 
"fix zip file"??? What exactly did you do that worked?? I'm having this
problem now with SP3.
 
Back
Top