fails at 27%

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I really hope someone could help...

I'm trying to install on a new primary partition (j:\). I decompressed iso
image on j:\vista install and ran setup from there. I noticed that it creates
temp folders on C (win xp sp2). It copies the files, then it fails when it
inflates them at 27% saying that it cannot boot into the next stage.

I would appreciate any help.

Thank you
Stephan
 
Have you tried other installation methods such as burning the software to
DVD at a low speed and run setup? Also, I would check the integrity of the
ISO you downloaded to make its OK.
I use the one from Ahead Nero
http://ww2.nero.com/nero6/eng/Nero_MD5_Verifier.html

Here are the MD5/CRC values for x86 or x64 depending on which every ISO you
downloaded:

x86
- File Size = 3.12 GB (3,355,598,848 bytes)
- CRC Value = 0x67E089E0
- MD5 Value = 0E733AB1A8E8FF9A8684FD3639332773
x64
- File Size = 4.01 GB (4,309,368,832 bytes)
- CRC Value = 0x48697711
- MD5 Value = E43502D0A15EADD551119D5639859E04

Paste the MD5 Checksum for either x64 or x86 depending on which one you want
check in Step 1, Step 2 - Browse to where you stored the ISO on your drive
and open it and it will automatically start the varification process and
generate the has in the third field, if it matches Step 1, then you are
safe.
--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta
 
Andre,

thanks for reply.

yes, I tried directly from the dvd, no luck. i did use nero md5 verifier,
the checksum of my iso is correct.
 
same exact error i'm having, Stephan - tried this 15 different times, from a
DVD, from the extracted ISO, from a mounted image via Nero - always stops at
27% and reboots - finally an error i got is "failed to open windows image".
install.wim in the sources folder is 2.8G... wonder if this is the issue...?
can't find anything on this.

if you fix it, please let me know? and vice versa...
 
if i find a solution i'll post it here although i have no clue why it fails.
you get to at least one step further becuase mine doesn't reboot at 27%, just
stops, throws the error and rolls back.
 
some things that have helped in the past.
delete the partition, recreate and format using recover console from different OS.
disable all devices not needed for install. such as
serial ports, parallel ports,usb devices, etc.....



(e-mail address removed)



I really hope someone could help...

I'm trying to install on a new primary partition (j:\). I decompressed iso
image on j:\vista install and ran setup from there. I noticed that it creates
temp folders on C (win xp sp2). It copies the files, then it fails when it
inflates them at 27% saying that it cannot boot into the next stage.

I would appreciate any help.

Thank you
Stephan
 
Back
Top