S
Sabosis
Hello-
I have posted the code I am using below (from Ron DeBruin's SendMail examples). When we went to Office 2010, a number of spreadsheets that send through Outlook no longer worked, so I found this code which should work in Office 2010. I can get an email to generate using .Display, but if I change the line to .Send the code will finish with no email created and sent. I'm at aloss as to why this would happen.
Here is my code, I have it set up to email a selection in the body of the Outlook message.
Sub SendStats()
' Don't forget to copy the function RangetoHTML in the module.
' Working in Office 2000-2010
Dim rng As Range
Dim OutApp As Object
Dim OutMail As Object
Dim Rep As Range
Dim Subject As Range
With Application
.EnableEvents = False
.ScreenUpdating = False
End With
Set rng = Nothing
On Error Resume Next
Set rng = Sheets("Stats").Range("A1:O10").SpecialCells(xlCellTypeVisible)
On Error GoTo 0
If rng Is Nothing Then
MsgBox "The selection is not a range or the sheet is protected" & _
vbNewLine & "please correct and try again.", vbOKOnly
Exit Sub
End If
Set OutApp = CreateObject("Outlook.Application")
Set OutMail = OutApp.CreateItem(0)
Set Rep = Sheets("Stats").Range("C14")
Set Subject = Sheets("Stats").Range("A3")
On Error Resume Next
With OutMail
.To = Rep.Value
.CC = ""
.BCC = ""
.Subject = "Rep Stats for" & " " & Subject.Value
.HTMLBody = RangetoHTML(rng)
.Send
End With
On Error GoTo 0
With Application
.EnableEvents = True
.ScreenUpdating = True
End With
Set OutMail = Nothing
Set OutApp = Nothing
End Sub
Function RangetoHTML(rng As Range)
' Changed by Ron de Bruin 28-Oct-2006
' Working in Office 2000-2010
Dim fso As Object
Dim ts As Object
Dim TempFile As String
Dim TempWB As Workbook
TempFile = Environ$("temp") & "\" & Format(Now, "dd-mm-yy h-mm-ss") &".htm"
'Copy the range and create a new workbook to past the data in
rng.Copy
Set TempWB = Workbooks.Add(1)
With TempWB.Sheets(1)
.Cells(1).PasteSpecial Paste:=8
.Cells(1).PasteSpecial xlPasteValues, , False, False
.Cells(1).PasteSpecial xlPasteFormats, , False, False
.Cells(1).Select
Application.CutCopyMode = False
On Error Resume Next
.DrawingObjects.Visible = True
.DrawingObjects.Delete
On Error GoTo 0
End With
'Publish the sheet to a htm file
With TempWB.PublishObjects.Add( _
SourceType:=xlSourceRange, _
Filename:=TempFile, _
Sheet:=TempWB.Sheets(1).Name, _
Source:=TempWB.Sheets(1).UsedRange.Address, _
HtmlType:=xlHtmlStatic)
.Publish (True)
End With
'Read all data from the htm file into RangetoHTML
Set fso = CreateObject("Scripting.FileSystemObject")
Set ts = fso.GetFile(TempFile).OpenAsTextStream(1, -2)
RangetoHTML = ts.readall
ts.Close
RangetoHTML = Replace(RangetoHTML, "align=center x
ublishsource=", _
"align=left xublishsource=")
'Close TempWB
TempWB.Close savechanges:=False
'Delete the htm file we used in this function
Kill TempFile
Set ts = Nothing
Set fso = Nothing
Set TempWB = Nothing
End Function
I have posted the code I am using below (from Ron DeBruin's SendMail examples). When we went to Office 2010, a number of spreadsheets that send through Outlook no longer worked, so I found this code which should work in Office 2010. I can get an email to generate using .Display, but if I change the line to .Send the code will finish with no email created and sent. I'm at aloss as to why this would happen.
Here is my code, I have it set up to email a selection in the body of the Outlook message.
Sub SendStats()
' Don't forget to copy the function RangetoHTML in the module.
' Working in Office 2000-2010
Dim rng As Range
Dim OutApp As Object
Dim OutMail As Object
Dim Rep As Range
Dim Subject As Range
With Application
.EnableEvents = False
.ScreenUpdating = False
End With
Set rng = Nothing
On Error Resume Next
Set rng = Sheets("Stats").Range("A1:O10").SpecialCells(xlCellTypeVisible)
On Error GoTo 0
If rng Is Nothing Then
MsgBox "The selection is not a range or the sheet is protected" & _
vbNewLine & "please correct and try again.", vbOKOnly
Exit Sub
End If
Set OutApp = CreateObject("Outlook.Application")
Set OutMail = OutApp.CreateItem(0)
Set Rep = Sheets("Stats").Range("C14")
Set Subject = Sheets("Stats").Range("A3")
On Error Resume Next
With OutMail
.To = Rep.Value
.CC = ""
.BCC = ""
.Subject = "Rep Stats for" & " " & Subject.Value
.HTMLBody = RangetoHTML(rng)
.Send
End With
On Error GoTo 0
With Application
.EnableEvents = True
.ScreenUpdating = True
End With
Set OutMail = Nothing
Set OutApp = Nothing
End Sub
Function RangetoHTML(rng As Range)
' Changed by Ron de Bruin 28-Oct-2006
' Working in Office 2000-2010
Dim fso As Object
Dim ts As Object
Dim TempFile As String
Dim TempWB As Workbook
TempFile = Environ$("temp") & "\" & Format(Now, "dd-mm-yy h-mm-ss") &".htm"
'Copy the range and create a new workbook to past the data in
rng.Copy
Set TempWB = Workbooks.Add(1)
With TempWB.Sheets(1)
.Cells(1).PasteSpecial Paste:=8
.Cells(1).PasteSpecial xlPasteValues, , False, False
.Cells(1).PasteSpecial xlPasteFormats, , False, False
.Cells(1).Select
Application.CutCopyMode = False
On Error Resume Next
.DrawingObjects.Visible = True
.DrawingObjects.Delete
On Error GoTo 0
End With
'Publish the sheet to a htm file
With TempWB.PublishObjects.Add( _
SourceType:=xlSourceRange, _
Filename:=TempFile, _
Sheet:=TempWB.Sheets(1).Name, _
Source:=TempWB.Sheets(1).UsedRange.Address, _
HtmlType:=xlHtmlStatic)
.Publish (True)
End With
'Read all data from the htm file into RangetoHTML
Set fso = CreateObject("Scripting.FileSystemObject")
Set ts = fso.GetFile(TempFile).OpenAsTextStream(1, -2)
RangetoHTML = ts.readall
ts.Close
RangetoHTML = Replace(RangetoHTML, "align=center x
ublishsource=", _"align=left x
ublishsource=")'Close TempWB
TempWB.Close savechanges:=False
'Delete the htm file we used in this function
Kill TempFile
Set ts = Nothing
Set fso = Nothing
Set TempWB = Nothing
End Function