Excel 2007 worksheet switching issue using Windows 7

  • Thread starter Thread starter mrjroz
  • Start date Start date
M

mrjroz

Has anyone experienced an issue with the ability to fluently switch between
worsheets in an Excel 2007 Workbook? I noticed that it would often take
several mouse clicks on a Tab before the worksheet finally switched. Once it
does, it is fluent for a short time and then hangs up again. The cycle
repeats.

Any suggestions that will help this, shy of a patch or waiting for MSO 2010?
 
I have the same issue. It brings up the master explorer program menu
(Restore, Move, Size, Minimize, Maximize, Close). Bugs me a lot.
 
Do you have any add-ins loaded that are using the sheet
activate/deactivate event to do a bunch of work?

Does it only happen in Win 7?

Cheers
Simon
Excel development website: www.codematic.net
 
Just upgraded to Win 7 and quickly discovered this "feature." Same as the
others: hard to switch worksheets; often the master explorer menu pops up. I
better not have to upgrade just to get rid of this error...
 
Workaround for now: CTRL + PG DOWN (or PG UP) will move to worksheet to left
or right... You have to have a cell in the worksheet selected.

For the record, I have Win 7 64 bit.
 
We've exactly the same problem on PCs with Windows Vista and W7 both x64. We
don’t use any macros, any add-ins in Excel 2007. I checked Updates and
KB973593 is not installed.
How shall we fix the issue?
Thanks a lot.
Koudy.


Jan Karel Pieterse píše:
 
Hallo Jan,
yes, all automatic updates are installed to our PCs including SP2 for MSO2.
Jirka


Jan Karel Pieterse píše:
 
The issue is indicated on various excel’s workbooks on two independent PC’s
(one is newly installed 3 weeks ago).

Jan Karel Pieterse píše:
 
Hallo Jan,
the problem started on my PC about 3 months ago but I don’t know the date
exactly. I’ll try to remove some last updates (MSO and/or Windows???). But I
don’t like solutions like that. My PC is fine tuned in the other fields and I
don’t want to do any harm. Maybe I’ll wait for new proper update.
For now I thank you very much for your advice.
Jiri


Jan Karel Pieterse píše:
 
Hi Jan,
I tried hotfix kb978522 and kb978399 and nothing is solved. No hotfix you
wrote about earlier is installed on my PC.
Maybe a resolution of the graphics is the reason. It is 1920 x 1200 on both
PCs (HP EliteBook 8730w) and problem is presented only if Excel is maximized
 
Bad switching between tabs occurs only if display Y resolution is 1200.
Otherwise it works OK.
Jiri

Jan Karel Pieterse píše:
 
Hi Jan
OK. So thank you very much. We are waiting for MSO2010.
Jiri Koudelka

Jan Karel Pieterse píše:
 
I too am having this problem and have found that changing the resolution is a
temporary fix. Details of my system are:

HP Pavilion dv7 Notebook
Windows 7 Home 64-bit
8 gb ddr3 ram
MS Office 2007
NVIDIA GeForce GT320M

One other thing that I noticed that makes me think that it make not be a
display driver is that when you "undock" the excel workbook from the excel
application so that it is in "window mode," switching between worksheets
works without a hitch, regardless of the resolution of my screen. Any
further insight or ideas into what is causing this problem would be greatly
appreciated.

Thank you for everyone's support as this is the only place where I have seen
a discussion on the tpoic. Any further help will be greatly appreciated.

Best,
Chad
 
Also, the native resolution on my screen is 1600 x 900 (which is less than
the y-1200 mentioned above) and the issues are still prevalent.
 
Jan,

Thank you again for your work on this subject. I have adjusted the hardware
acceleratin settings but to no avail. Unfortunately, the issue is still
prevalent. I have also gone throught he process of uninstalling all MS
Office updates (excluding SP2) to see if I could narrow down if it was an
update that is causing the problem, and unfortunately, I was not able to
reach a conclusion that way either.

Please update us if you find anything out.

Thanks again,
Chad
 
I have the same problem too, who can help????
excel 2007 in window 7 hangs accasionally when switch worksheet few times in
few seconds.
Any updating to this post?
 
Maybe here is the solution:
A few days ago a hot fix for application “HP Wireless Assistant - 3.50.11.2
(15 IV 2010) - sp48392.exe (3.8 MB)†was released. And the comment is:

“Fixes an issue, which occurs when using Microsoft Excel on a notebook that
is running a 32-bit version of the Microsoft Windows 7 Professional Operating
System, where a pop-up menu is displayed when the Sheet1 tab at the bottom of
the screen is clicked (instead of the tab contents being displayed). The
displayed pop-up menu is the same as the menu you would see if you
right-clicked the window's title bar.â€

Exactly what we need!!! I installed it at once and the issue seems to be
solved. No menu appears, but sometimes I cannot switch by one click, I have
to click several times. But it is certainly improvement.
And good thing is that we know, what the reason is. I will go after new
versions of this driver/application.

For my HP notebook:
http://h20000.www2.hp.com/bizsuppor...wEnvOID=2103&swLang=5&taskId=135&mode=4&idx=3

good luck!
Jiri Koudelka


Jan Karel Pieterse píše:
 
Back
Top