Event ID: 5774 NETLOGON Error

  • Thread starter Thread starter Dave
  • Start date Start date
D

Dave

As far as I can see, the only problem that I have left in my DNS (W2K) is
the following error. I tried the MS KB Article #284963 to fix it, but it
didn't... Does anyone have a clue how to make this last error go away?

Source: NETLOGON
Event ID: 5774

Registration of the DNS record
'8b650c5c-e2da-4d34-8d44-640aee44ef9d._msdcs.southwest.org. 600 IN CNAME
kodiak.southwest.org.' failed with the following error:
DNS RR set that ought to exist, does not exist.




ipconfig/displaydns

8b650c5c-e2da-4d34-8d44-640aee44ef9d._msdcs.southwest.org.
 
In
Dave said:
As far as I can see, the only problem that I have left in my DNS
(W2K) is the following error. I tried the MS KB Article #284963 to
fix it, but it didn't... Does anyone have a clue how to make this
last error go away?

Source: NETLOGON
Event ID: 5774

Registration of the DNS record
'8b650c5c-e2da-4d34-8d44-640aee44ef9d._msdcs.southwest.org. 600 IN
CNAME kodiak.southwest.org.' failed with the following error:
DNS RR set that ought to exist, does not exist.




ipconfig/displaydns

8b650c5c-e2da-4d34-8d44-640aee44ef9d._msdcs.southwest.org.
Click to expand...

Those 5774's are usually from using an ISP's or some other
outside DNS server (maybe the router too?) in the machines' IP properties
other than the required MUST ONLY USE your internal DNS on all machines (DCs
and clients).

Apparently the 5774's are saying it's trying to update the zone but it's not
being allowed at the ISP. Only use the internal DNS and suggested to use a
forwarder for outside resolution.

Another issue is a possible single label AD DNS domain name, but that would
also generate 5781's.


--
Regards,
Ace

Please direct all replies to the newsgroup so all can benefit.
This posting is provided "AS IS" with no warranties.

Ace Fekay, MCSE 2000, MCSE+I, MCSA, MCT, MVP
Microsoft Windows MVP - Active Directory
 
So this is my problem?

Adapter
Physical Address. . . . . . . . . : 00-C0-F0-3B-BB-09
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.0.0.99
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.0.0.1
DNS Servers . . . . . . . . . . . : 206.13.30.12
206.13.29.12
65.106.1.196
65.106.7.196
207.155.183.72
206.173.119.72

Seems fine on the clients:

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : southwest.org
Description . . . . . . . . . . . : LNE100TX Fast Ethernet Adapter
on 1.0
Physical Address. . . . . . . . . : 00-C0-F0-59-5F-05
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 10.0.0.101
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.0.0.1
DHCP Server . . . . . . . . . . . : 10.0.0.99
DNS Servers . . . . . . . . . . . : 10.0.0.99

It'd only be this DC that is the problem - it's the only one with the error,
but if it IS the problem, it explains one or two other teeny things..

Can you clarify (in the meantime, I changed it and cleared the Event log)?

Thanks,

Dave


"Ace Fekay [MVP]"
 
In Dave <[email protected]> posted a question
Then Kevin replied below:
: So this is my problem?
:
: Adapter
: Physical Address. . . . . . . . . : 00-C0-F0-3B-BB-09
: DHCP Enabled. . . . . . . . . . . : No
: IP Address. . . . . . . . . . . . : 10.0.0.99
: Subnet Mask . . . . . . . . . . . : 255.255.255.0
: Default Gateway . . . . . . . . . : 10.0.0.1
: DNS Servers . . . . . . . . . . . : 206.13.30.12
: 206.13.29.12
: 65.106.1.196
: 65.106.7.196
: 207.155.183.72
: 206.173.119.72
:
Yes, the client is fine, but out of six DNS addresses on the server not even
one is the server itself. You need to remove all of these and put in
10.0.0.99 only. You can configure the rest as forwarders in the DNS server
properties on the forwarder tab.
Read through this KB starting at step 3: 300202 - HOW TO: Configure DNS for
Internet Access in Windows 2000
http://support.microsoft.com/?id=300202&FR=1
 
You betcha.. I did that and now I get the first good message back:

The partial synchronization request from the server LEDOUX completed
successfully. 1 changes(s) has(have) been returned to the caller.

Thanks for the help, guys.. I'm not new to most things, but I avoided DNS
for as long as possible. Just another one of those things that I'd wished
I'd learned long ago.

But I DO have a good one for "you" that perhaps I can get a hand with. As
soon as I can describe it properly I'll post it.

Thanks,

Dave
 
In
Dave said:
You betcha.. I did that and now I get the first good message back:

The partial synchronization request from the server LEDOUX completed
successfully. 1 changes(s) has(have) been returned to the caller.

Thanks for the help, guys.. I'm not new to most things, but I avoided
DNS for as long as possible. Just another one of those things that
I'd wished I'd learned long ago.

But I DO have a good one for "you" that perhaps I can get a hand
with. As soon as I can describe it properly I'll post it.

Thanks,

Dave
Click to expand...


Dave, Never ever listen to your ISP when they tell you that you MUST use
their DNS in your internal network. In most cases, 1st and 2nd level support
are either not familiar with AD or their documentation does not take into
account an AD infrastructure.

--
Regards,
Ace

Please direct all replies to the newsgroup so all can benefit.
This posting is provided "AS IS" with no warranties.

Ace Fekay, MCSE 2000, MCSE+I, MCSA, MCT, MVP
Microsoft Windows MVP - Active Directory
 
Back
Top