Event Err

  • Thread starter Thread starter DL
  • Start date Start date
D

DL

Win2k sp4
Event Mngr shows the following err
'The Device \Device\Scsi\si3113r1, did not respond within the timeout
period'
I realise it refers to my onboard raid controler/driver
I use raid 1, the raid utility reports all OK
Can some one advise on what this means.
TY
 
DL said:
Win2k sp4
Event Mngr shows the following err
'The Device \Device\Scsi\si3113r1, did not respond within the timeout
period'
I realise it refers to my onboard raid controler/driver
I use raid 1, the raid utility reports all OK
Can some one advise on what this means.
Click to expand...

It probably means that the one of the drives is on the verge of dying.
It's a good idea to run a good disk diagnostic program on each drive and see
if it shows any problems.
 
Disk diag.utility, run over several loops, shows both disks OK
There is no correlation between a reboot and the event err.
Doesnt appear to be any correlation with writing data

Gary Chanson said:
DL said:
Win2k sp4
Event Mngr shows the following err
'The Device \Device\Scsi\si3113r1, did not respond within the timeout
period'
I realise it refers to my onboard raid controler/driver
I use raid 1, the raid utility reports all OK
Can some one advise on what this means.
Click to expand...

It probably means that the one of the drives is on the verge of dying.
It's a good idea to run a good disk diagnostic program on each drive and see
if it shows any problems.

--
-GJC [MS Windows SDK MVP]
-Software Consultant (Embedded systems and Real Time Controls)
- http://www.mvps.org/ArcaneIncantations/consulting.htm
(e-mail address removed)
Click to expand...
 
Back
Top