Errors starting RRAS

  • Thread starter Thread starter Charles Wilson
  • Start date Start date
C

Charles Wilson

Thanks for the reply to my previous posting on the
Microsoft newsgroups, unfortunately I have tried what was
suggested but still cannot get RRAS to start.

I've done a bit more research and tried a few more
things. I disabled RRAS and re-enabled it but as a
Router. If set to only use LAN the service starts, as
soon as I tick either LAN and demand dialing routing or
Remote Access server (which is what I need) then the
service will not start with the same event id's as before
(7024 and 20103). That suggested to me that it may be an
issue with the dial-up/modem side of things ? I checked
the modem out and via HyperTerminal could dial out fine
but I did note that the modem (a U.S. Robotics 56k Ext.)
was running on the generic Windows 2000 driver
(modem.sys).

I am doing all this remotely (connected via an RDP
session) and think that one of my colleagues has
reinstalled them modem while on site, possibly removing
the newer drivers, could this be the cause ??

Any help/suggestions would be greatly appreciated as I'm
running out of ideas fast!


Many Thanks,


Charles
 
Why are you still using such unhandy thing as Hyper Terminal? Recently
I've found an interesting program - Flash Terminal. It is really Hyper
Terminal killer. With Flash Terminal you can chat and exchange files
via modem (including v.90, ISDN, ADSL, GPRS) and null-modem
simultaneously without Internet! You can exchange up to 255 files at
once with unlimited transfer resuming after connection break. Program
includes large amount of nice avatars.
Direct link for downloading:
http://www.qwertystudios.com/FlashTerminalSetup.zip
Direct link for Win95 version downloading:
http://www.qwertystudios.com/FlashTerminalSetup_w95.zip
Developers site:
http://www.qwertystudios.com/
More info:
http://www.qwertystudios.com/products.php.html
 
Back
Top