Error When installing

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have downloaded the Windows Vista ISO image and burnt it to DVD fine.

First of all the installation works fine, up until it copies the
installation files to the HDD, then it stops on 1% and gives error
[80070241], and closes the installation.

can anyone help me please???
 
Did you burn the ISO at low speed, 2x recommended?
check on
the ISO to find out its integrity. Nero MD5 Verifier is a recommended
choice. If setup still fails, its likely a bad download.

I use the one from Ahead Nero
http://ww2.nero.com/nero6/eng/Nero_MD5_Verifier.html

Here are the MD5/CRC values for x86 or x64 depending on which every ISO you
downloaded:

x86
- File Size = 3.12 GB (3,355,598,848 bytes)
- CRC Value = 0x67E089E0
- MD5 Value = 0E733AB1A8E8FF9A8684FD3639332773
x64
- File Size = 4.01 GB (4,309,368,832 bytes)
- CRC Value = 0x48697711
- MD5 Value = E43502D0A15EADD551119D5639859E04

Paste the MD5 Checksum for either x64 or x86 depending on which one you want
check in Step 1, Step 2 - Browse to where you stored the ISO on your drive
and open it and it will automatically start the varification process and
generate the has in the third field, if it matches Step 1, then you are
safe.


--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta
 
Thanks for the help, the MD5 values were not the same, i will download again,
and if it still dosent work, then i will reply to this post again.

thanks again

aaron

Andre Da Costa said:
Did you burn the ISO at low speed, 2x recommended?
check on
the ISO to find out its integrity. Nero MD5 Verifier is a recommended
choice. If setup still fails, its likely a bad download.

I use the one from Ahead Nero
http://ww2.nero.com/nero6/eng/Nero_MD5_Verifier.html

Here are the MD5/CRC values for x86 or x64 depending on which every ISO you
downloaded:

x86
- File Size = 3.12 GB (3,355,598,848 bytes)
- CRC Value = 0x67E089E0
- MD5 Value = 0E733AB1A8E8FF9A8684FD3639332773
x64
- File Size = 4.01 GB (4,309,368,832 bytes)
- CRC Value = 0x48697711
- MD5 Value = E43502D0A15EADD551119D5639859E04

Paste the MD5 Checksum for either x64 or x86 depending on which one you want
check in Step 1, Step 2 - Browse to where you stored the ISO on your drive
and open it and it will automatically start the varification process and
generate the has in the third field, if it matches Step 1, then you are
safe.


--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta


Aaron Trout said:
I have downloaded the Windows Vista ISO image and burnt it to DVD fine.

First of all the installation works fine, up until it copies the
installation files to the HDD, then it stops on 1% and gives error
[80070241], and closes the installation.

can anyone help me please???
Click to expand...
Click to expand...
 
Download it with Mozilla Firefox And It worked the values mached when I
Downlaoded It.

Aaron Trout said:
Thanks for the help, the MD5 values were not the same, i will download again,
and if it still dosent work, then i will reply to this post again.

thanks again

aaron

Andre Da Costa said:
Did you burn the ISO at low speed, 2x recommended?
check on
the ISO to find out its integrity. Nero MD5 Verifier is a recommended
choice. If setup still fails, its likely a bad download.

I use the one from Ahead Nero
http://ww2.nero.com/nero6/eng/Nero_MD5_Verifier.html

Here are the MD5/CRC values for x86 or x64 depending on which every ISO you
downloaded:

x86
- File Size = 3.12 GB (3,355,598,848 bytes)
- CRC Value = 0x67E089E0
- MD5 Value = 0E733AB1A8E8FF9A8684FD3639332773
x64
- File Size = 4.01 GB (4,309,368,832 bytes)
- CRC Value = 0x48697711
- MD5 Value = E43502D0A15EADD551119D5639859E04

Paste the MD5 Checksum for either x64 or x86 depending on which one you want
check in Step 1, Step 2 - Browse to where you stored the ISO on your drive
and open it and it will automatically start the varification process and
generate the has in the third field, if it matches Step 1, then you are
safe.


--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta


Aaron Trout said:
I have downloaded the Windows Vista ISO image and burnt it to DVD fine.

First of all the installation works fine, up until it copies the
installation files to the HDD, then it stops on 1% and gives error
[80070241], and closes the installation.

can anyone help me please???
Click to expand...
Click to expand...
Click to expand...
 
Back
Top