Error message Service required

  • Thread starter Thread starter Toady
  • Start date Start date
T

Toady

I have an Epson Stylus Photo R300. While running a nozzle check and
error message appeared and the error light began blinking
continuously. Message said "service required, printer parts are at end
of service life". I contacted Epson support and they said it was
because of "failure of non-user replaceable parts" and I needed to
have it serviced.

Anybody know what kind of parts they are talking about?

Toady
 
Toady said:
I have an Epson Stylus Photo R300. While running a nozzle check and
error message appeared and the error light began blinking
continuously. Message said "service required, printer parts are at end
of service life". I contacted Epson support and they said it was
because of "failure of non-user replaceable parts" and I needed to
have it serviced.

Anybody know what kind of parts they are talking about?

Toady
Click to expand...

I suggest that it it's the waste ink sponge. It's where the 50% of the ink
goes that is used to clean the printheads. Search google for home solutions
or take to a dealer. Costs about £18 in UK.

Feenee
 
All inkjet printers have waste ink pads that hold the ink used in the
cleaning cycles that help to keep the heads clear.

When that ink pad gets to a certain point, the printer will shut down to
prevent the ink from leaking out of the printer. Epson is pretty
conservative with the numbers, so usually you can reset the printer once
and run another cycle before worrying, although I suggest people who do
a reset to place the printer on some absorbent paper with plastic sheet
under those sheets to protect furniture should the pad fill and begin to
leak out of the printer.

You can also move the waste ink tube out of the printer into an external
bottle with an extended tube so that when the bottle fills you can
replace it, rather than have to replace the ink pads when they fill on
the second reset, which can be costly.

To reset the waste ink protect numbers to zero, download and read the
instructions for the free software found at:

http://www.ssclg.com/epsone.shtml


Art
 
Arthur said:
All inkjet printers have waste ink pads that hold the ink used in the
cleaning cycles that help to keep the heads clear.

When that ink pad gets to a certain point, the printer will shut down
to prevent the ink from leaking out of the printer. Epson is pretty
conservative with the numbers, so
Click to expand...

it is best to get a new printer. If you are using a standard format
printer they are very inexpensive. Not much more than an entire set of
ink so it is best not to screw around.
 
Back
Top