Error Code 0x80070022 during install

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I had some issues with Vista and I decided to dump the previous install and
go it fresh. After formating my primary hard drive; or at least telling it
to when prompted to select a hard drive to install Vista on I got the error
code 0x80070022 Make sure all files required for installation are available.
The last install I did was an upgrade from XP pro this time I decided to go
at a fresh install to try and kick some of the issues I was having. Now I am
lost I've spent all of last night and all of tonight fighting with these darn
bugs any one got any clues for me?
 
Joe,

Setup encountered error while copying files from the installation media.
From the error code, it seems to indicate that there is some issue with the
installation media. It could be hardware related. [It seems that Windows for
some reason detected that the media disappears and appears again, and
determined that the reappeared media is different from the original one.]

Can you try running the installation again and see if it works this time?

If it still fails, can you try copying everything to your local harddrive
from the installation media and run setup from local harddrive?

-Ian
 
Well I did a bunch of times. One other thing too, it takes about 30 minutes
just to get to the install or repair windows screen after I hit any key to
boot from the dvd. Its clearly working and then all of a sudden its like
Windows forgets that it was installing from a dvd and then asks for drivers
for the dvd rom. Because if I go into the drive that Vista install disc is
in it says its a CD-rom and doesnt show any of the files from the install.

Im not sure what you mean by copying the files? It said it was copying the
files and then when it gets to expanding them it just goes through this whole
mess. So Im not certain what the deal is and I did by a new dvd burner that
is sata instead of IDE. Maybe if the current install fails again I'll put it
in and try with that.

Ian Cheung said:
Joe,

Setup encountered error while copying files from the installation media.
From the error code, it seems to indicate that there is some issue with the
installation media. It could be hardware related. [It seems that Windows for
some reason detected that the media disappears and appears again, and
determined that the reappeared media is different from the original one.]

Can you try running the installation again and see if it works this time?

If it still fails, can you try copying everything to your local harddrive
from the installation media and run setup from local harddrive?

-Ian

--
This posting is provided "AS IS" with no warranties, and confers no rights.


Joe C. said:
I had some issues with Vista and I decided to dump the previous install and
go it fresh. After formating my primary hard drive; or at least telling it
to when prompted to select a hard drive to install Vista on I got the error
code 0x80070022 Make sure all files required for installation are available.
The last install I did was an upgrade from XP pro this time I decided to go
at a fresh install to try and kick some of the issues I was having. Now I am
lost I've spent all of last night and all of tonight fighting with these darn
bugs any one got any clues for me?
Click to expand...
Click to expand...
 
It should not take so long to boot from the Vista install disc. The dvd rom
is unusually slow. I don't know what could be the cause. If you have another
IDE DVD rom, it may work better.

Alternatively,
Im not sure what you mean by copying the files?
Click to expand...

If you have an existing XP partition, you can try copying the files from the
DVD to a local harddisk, and run the setup.exe from the local harddisk.

-Ian

--
This posting is provided "AS IS" with no warranties, and confers no rights.



Joe C. said:
Well I did a bunch of times. One other thing too, it takes about 30
minutes
just to get to the install or repair windows screen after I hit any key to
boot from the dvd. Its clearly working and then all of a sudden its like
Windows forgets that it was installing from a dvd and then asks for
drivers
for the dvd rom. Because if I go into the drive that Vista install disc
is
in it says its a CD-rom and doesnt show any of the files from the install.

Im not sure what you mean by copying the files? It said it was copying
the
files and then when it gets to expanding them it just goes through this
whole
mess. So Im not certain what the deal is and I did by a new dvd burner
that
is sata instead of IDE. Maybe if the current install fails again I'll put
it
in and try with that.

Ian Cheung said:
Joe,

Setup encountered error while copying files from the installation media.
From the error code, it seems to indicate that there is some issue with
the
installation media. It could be hardware related. [It seems that Windows
for
some reason detected that the media disappears and appears again, and
determined that the reappeared media is different from the original one.]

Can you try running the installation again and see if it works this time?

If it still fails, can you try copying everything to your local harddrive
from the installation media and run setup from local harddrive?

-Ian

--
This posting is provided "AS IS" with no warranties, and confers no
rights.


Joe C. said:
I had some issues with Vista and I decided to dump the previous install
and
go it fresh. After formating my primary hard drive; or at least
telling it
to when prompted to select a hard drive to install Vista on I got the
error
code 0x80070022 Make sure all files required for installation are
available.
The last install I did was an upgrade from XP pro this time I decided
to go
at a fresh install to try and kick some of the issues I was having.
Now I am
lost I've spent all of last night and all of tonight fighting with
these darn
bugs any one got any clues for me?
Click to expand...
Click to expand...
Click to expand...
 
Yeah something was not right with that DVD burner I had. Before I had all
the issues, the first install of Vista I did it took for ever to get to the
install screen. I just put in a new Samsung DVD burner and it is flying; so
this appears to be the problem. Its really moving along pretty quick here,
now I hope I don't run into the networking issues that started this whole
mess for me to begin with.



Ian Cheung said:
It should not take so long to boot from the Vista install disc. The dvd rom
is unusually slow. I don't know what could be the cause. If you have another
IDE DVD rom, it may work better.

Alternatively,
Im not sure what you mean by copying the files?
Click to expand...

If you have an existing XP partition, you can try copying the files from the
DVD to a local harddisk, and run the setup.exe from the local harddisk.

-Ian

--
This posting is provided "AS IS" with no warranties, and confers no rights.



Joe C. said:
Well I did a bunch of times. One other thing too, it takes about 30
minutes
just to get to the install or repair windows screen after I hit any key to
boot from the dvd. Its clearly working and then all of a sudden its like
Windows forgets that it was installing from a dvd and then asks for
drivers
for the dvd rom. Because if I go into the drive that Vista install disc
is
in it says its a CD-rom and doesnt show any of the files from the install.

Im not sure what you mean by copying the files? It said it was copying
the
files and then when it gets to expanding them it just goes through this
whole
mess. So Im not certain what the deal is and I did by a new dvd burner
that
is sata instead of IDE. Maybe if the current install fails again I'll put
it
in and try with that.

Ian Cheung said:
Joe,

Setup encountered error while copying files from the installation media.
From the error code, it seems to indicate that there is some issue with
the
installation media. It could be hardware related. [It seems that Windows
for
some reason detected that the media disappears and appears again, and
determined that the reappeared media is different from the original one.]

Can you try running the installation again and see if it works this time?

If it still fails, can you try copying everything to your local harddrive
from the installation media and run setup from local harddrive?

-Ian

--
This posting is provided "AS IS" with no warranties, and confers no
rights.


:

I had some issues with Vista and I decided to dump the previous install
and
go it fresh. After formating my primary hard drive; or at least
telling it
to when prompted to select a hard drive to install Vista on I got the
error
code 0x80070022 Make sure all files required for installation are
available.
The last install I did was an upgrade from XP pro this time I decided
to go
at a fresh install to try and kick some of the issues I was having.
Now I am
lost I've spent all of last night and all of tonight fighting with
these darn
bugs any one got any clues for me?
Click to expand...
Click to expand...
Click to expand...
 
I have same problem. I bought DVD from Fry's and i got "Can't open required
file E:\Sources\Install.wim, Make sure all files for installation are
available , and restart install Error Code: 0x8007000D"

Is my DVD bad ? or other problems with my hardware ?

Please help

Thanks
 
Hi,

If i do a fresh installation on a new hard drive, how can i copy files to
the hard drive and run setup from local drive ?

Please help

Thanks


Ian Cheung said:
Joe,

Setup encountered error while copying files from the installation media.
From the error code, it seems to indicate that there is some issue with the
installation media. It could be hardware related. [It seems that Windows for
some reason detected that the media disappears and appears again, and
determined that the reappeared media is different from the original one.]

Can you try running the installation again and see if it works this time?

If it still fails, can you try copying everything to your local harddrive
from the installation media and run setup from local harddrive?

-Ian

--
This posting is provided "AS IS" with no warranties, and confers no rights.


Joe C. said:
I had some issues with Vista and I decided to dump the previous install and
go it fresh. After formating my primary hard drive; or at least telling it
to when prompted to select a hard drive to install Vista on I got the error
code 0x80070022 Make sure all files required for installation are available.
The last install I did was an upgrade from XP pro this time I decided to go
at a fresh install to try and kick some of the issues I was having. Now I am
lost I've spent all of last night and all of tonight fighting with these darn
bugs any one got any clues for me?
Click to expand...
Click to expand...
 
Back
Top