Error 733 When Connecting to VPN

  • Thread starter Thread starter Amir
  • Start date Start date
A

Amir

When I connect to VPN, I get the following message:

"One or more requested network protocols did not connect
successfuly. TCP/IP CP connected successuly.
NetBEUI CP reported error 733: Your computer and the
remote computer could not agree on PPP control protocols."

Does anyone have any ideas?

Thanks
 
quoted form http://www.ChicagoTech.net

Error 733: the PPP control protocol for this network protocol is not
available on the server.

Resolution:
1) Ensure that the TCP/IP protocol is installed on your RAS server and that
the TCP/IP protocol is selected in the Server Settings of the Network
Configuration option of the Remote Access Setup dialog.
2) If you have the "Use DHCP to assign remote TCP/IP client addresses"
option selected for the TCP/IP protocol in the RAS Server Settings, then
ensure that you have installed DHCP and that it is not disabled.
3) Ensure that all of the bindings for TCP/IP are enabled in the Bindings
tab of the Network dialog of the Control Panel. Be sure to inspect the
TCP/IP Protocol and WINS Client (TCP/IP) bindings for all adapters, all
protocols, and all services. If the TCP/IP bindings are corrupt, you may
have to reinstall TCP/IP and or RAS in order to clean up the bindings.


--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Windows & Network Support, Tips and FAQs on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
Back
Top