Save yourself some time and trouble, given that you'll more than likely end
up with an unstable OS with all the remnants/ corruption left behind from
the upgrade. Best to blow it all away and go for the clean install.
To do a clean install, either boot the Windows 2000 CD-Rom or setup disks.
The set of four install disks can be created from your Win2k CD-rom; change
to the \bootdisk directory on the cd-rom and execute makeboot.exe (from dos)
or makebt32.exe (from 32 bit) and follow the prompts.
When you get to the point, delete the existing NTFS and or other partitions
found. After you delete the partition(s) abort the install, then again
restart the pc booting the CD-Rom or setup disks to avoid unexpected drive
letter assignments with your new install.
During Windows 2000 setup, at some point, will want to confirm the previous
operating system for the upgrade; at that point you'll simply insert the
qualified product install CD for it to verify. Then the install will
proceed.
Check the pc, mb or hardware manufacturer's web site for the latest bios and
or Windows 2000 drivers for your devices.
--
Regards,
Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft MVP [Windows NT/2000 Operating Systems]
Microsoft Certified Professional [Windows 2000]
http://www.microsoft.com/protect.
:
| I am installing Win2000 Pro from Win98SE. Everything goes
| fine from initial setup, then after first reboot I get an
| error message:
| Contact Technical Support with Error code
| 0x4, 0, 0, 0 for further assistance
| setup cannot continue
| What does this mean and what can I do to correct this?
| (I want to upgrade rather than clean install, if possible)
| Thank you in advance for your attention to this inquiry.
|
| Shaun.
