Epson V500 scanner

  • Thread starter Thread starter Tom from WI
  • Start date Start date
T

Tom from WI

Anyone have any experience with this scanner, especially experience scanning
slides.

Tom
 
Gordon said:
Tom I have it and it has worked well. The default will give you some low
dpi on
slides -- 300 as I recall. I adjusted it. I can not see that ICE did
much
good, but getting a can of dust remover is really helpful.

The have new Twain drivers, but you must install the CD before the new
Twain
drives.

If you have several hundreds (i.e. thousands) of slides this is going to
be
slow. You can load 4 slides in the rack. I have a neighbor who has the
V700. I believe that model holds 8 slides.

I suggest you download and read the manuals on models you are seriously
thinking
about.
________

Gordon Potter
Atlanta, GA
USA
The numeral "2" (e-mail address removed)
Click to expand...
I was reading about the V700, it can do 12 slides at a time. I had an old HP
S20 which did ONE slide at a time. I did scan about a 1000 slides on it,
but it barely converted to XP and was DOA with Vista. I did do a lot of
"dust blowing" on the slides I have done and didn't have much of a dust
problem. I guess I should go through the thousands of slides that I have and
see how many I really think are worth scanning.

From what I read about the V500, it looked like you have to adjust each
slide before the scanning starts. Is that true? Can't you just load the
slides and let it scan them? I can always adjust them later.
Tom
 
Back
Top