Epson tm-300PA printer

  • Thread starter Thread starter v.leandro
  • Start date Start date
V

v.leandro

Hi all

I have a problem with a Epson tm-300PA printer. When i turn on the
printer, she starts blinking the paper led, and even with paper she
assumes that there's no paper in. Could someone help me with this
problem?

Thank you
 
Try to make sure the paper sensors are properly positioned in their
spots in the printer, look for anything that might be either inpeding
the paper movement, or blocking some sensors due to excess heat, dust,
dog hair, etc.

Art
 
[email protected] said:
Hi all

I have a problem with a Epson tm-300PA printer. When i turn on the
printer, she starts blinking the paper led, and even with paper she
assumes that there's no paper in. Could someone help me with this
problem?

Thank you
Click to expand...

Do as Art said, the symptoms fit a blocked sensor, in my experience this is
most usually caused by a small scrap of paper left over the sensor after
removal of a paper jam.
The printer has no way of knowing whether there is paper in the paper tray so
if it fails to feed (due to an obstruction or a blocked sensor) it will assume
there is no paper present in the tray.
Tony
 
Tony said:
Do as Art said, the symptoms fit a blocked sensor, in my experience this is
most usually caused by a small scrap of paper left over the sensor after
removal of a paper jam.
The printer has no way of knowing whether there is paper in the paper tray so
if it fails to feed (due to an obstruction or a blocked sensor) it will assume
there is no paper present in the tray.
Tony da Tiger
Click to expand...
 
When you turn on printer, and it won't initialize, and the red led is
blinking, there is a problem with head cable, try to change it!
 
Back
Top