EPSON STYLUS PROBLEM

  • Thread starter Thread starter coverman design
  • Start date Start date
C

coverman design

In my previous post, I asked for Epson Stylus 1160 color printers.

The reason for that, is that we have to print very much. The printers print
on a kind of plastic film and with a special kind of ink. The problem is,
that after short period (few days), they get stuck(the printheads are dirty)

The technique we use to print is called piëzzo

The special kind of ink(waterbased), is delivered in tins. We have to refill
the cartridges.
We can clean the printheads the normal way a few times, but if we return to
work after the weekend or don't print one day, they can't be cleaned
anymore...
Then we use some kind of cleaner-solution (of wich we don't know what it
is). That solution is a product we got from the ink-supplier. This solution
is very aggressive.When we use this too often, the printerheads kind of
melt/get weak... and printers don't work anymore.

Is there anyone who can help us in this matter???

We already bought about 20 printers in a short period of time... we need
help, because the printers cost us a lot.

For more information,

Email (e-mail address removed)

G. V.
Belgium
 
We know the inks are waterbased, we use them to print on films. The films
are used to cover housings for cell-phones.
That's about all we know, because the manufactor of the inks can't give us
the details about inks. They are patented...

Greetz.
 
The reason for that, is that we have to print very much. The printers print
on a kind of plastic film and with a special kind of ink. The problem is,
that after short period (few days), they get stuck(the printheads are dirty)
Click to expand...

Epson printers are notorious for clogged printheads. Can you get the
inks you need for Canon printers? If so, that's your best course of
action.

--
________________________________
Todd Walker
http://twalker.d2g.com
Canon 10D:
http://twalker.d2g.com/canon10d
My Digital Photography Weblog:
http://twalker.d2g.com/dpblog.htm
_________________________________
 
The inks are water-soluble when in liquid form, but when they dry they can
form a hard crust that resists water. The solvent provided by the ink
manufacturer is an acid which is why repeated uses destroys the printhead.

If 1 or 2 attempts at unclogging the printhead with the solvent fail your
only recourse is to physically replace the printhead itself.
 
The problem is the ink.Probably does use good solvent.It's better change the
ink.What is the company's name?Has a site?
 
I don't think the ink you use are water based, I suppose they are solvent
based. That's why you get printhead clogged in a few hours. On the other
hand, water based inks can't print on not very special films and even though
they aren't water-resistant or or light-fast.

I have sent you a direct email, for buying 1160 from Greece. Reply, may I
could help you.


--

Yianni
(e-mail address removed) (áöáéñÝóôå ôïí áñéèìü åííéÜ áðü ôï email)

--
 
Hello,

If you can remove the printheads to replace them, why not remove them
when your done printing and store them in a jar of water so the ink
won't dry. Being water based it should dissolve in the water nicely.

Have Fun,
Jeff
 
Hello,

I was thinking about your descripton of the ink. Waterbased ink that
dries into a waterproof crusty material sounds like acrylic paint. You
may want to check with your supplier to see if this is the case. If so,
there are products out that allow artists to remove dried acrylic paint
from brushes with no damage to the brush. This same compound may clean
your print heads without damaging them.

Have Fun,
Jeff
 
Hello,

I was thinking about your descripton of the ink. Waterbased ink that
dries into a waterproof crusty material sounds like acrylic paint. You
may want to check with your supplier to see if this is the case. If so,
there are products out that allow artists to remove dried acrylic paint
from brushes with no damage to the brush. This same compound may clean
your print heads without damaging them.

Have Fun,
Jeff
Click to expand...

Ask Mfg for a Material Saftey Data Sheet.....
 
Back
Top