EPSON Stylus Color 760: Keeps saying out of paper.......

  • Thread starter Thread starter Howard9
  • Start date Start date
H

Howard9

Hi guys,

Wondering if anyone has any suggestions on this ?


EPSON Stylus Color 760: It started reporting back that it is out of
paper despite the act that it is FULL of paper....

Is there any software thing or hardware jiggle that I can do to fix this
?

Obliged...
 
Hi guys,

Wondering if anyone has any suggestions on this ?
Click to expand...
EPSON Stylus Color 760: It started reporting back that it is out of
paper despite the act that it is FULL of paper....
Click to expand...

The Stylus Color 760 does not monitor the presence of paper in the
hopper tray.

What is the condition of the lights, LED, on the control panel?
 
Is it trying to load any paper when you try to print? When is it saying
it is out of paper? Usually this happens when the printer is unable to
load paper into the paper path for some reason, such as the wheels which
load the paper are slipping due to be being glazed. In that case, it
usually tries to load several times and then gives up and indicates out
of paper, since no paper was loaded into the paper path.

Art
 
The Stylus Color 760 does not monitor the presence of paper in the
hopper tray.

What is the condition of the lights, LED, on the control panel?
Click to expand...
Lights are fine... it is the PC that keeps telling me... I got it
working again by adding almost half a ream... but when it goes down to
about 60 sheets it stops again...:(
 
Is it trying to load any paper when you try to print?
No.

When is it saying
it is out of paper?
Click to expand...

SHortly after telling it to print. Only the PC says so,not the
printer...
Usually this happens when the printer is unable to
load paper into the paper path for some reason, such as the wheels which
load the paper are slipping due to be being glazed. In that case, it
usually tries to load several times and then gives up and indicates out
of paper, since no paper was loaded into the paper path.

Art
Click to expand...
No. no effort at all..
 
SHortly after telling it to print. Only the PC says so,not the
printer...

No. no effort at all..
Click to expand...

check the printer cable at the computer end, dissconnect it, brush it off and
re-connect it (and tighten it if it is a parallel conection).
 
check the printer cable at the computer end, dissconnect it, brush it off and
re-connect it (and tighten it if it is a parallel conection).
Click to expand...
Ok - thanks Larry !
 
Back
Top