EPSON STYLUS C80 partial page printing

  • Thread starter Thread starter Lee Wise
  • Start date Start date
L

Lee Wise

Is anybody having problems with their Epson printing part of a page and then
ejecting the paper and continuing the printout on the next piece of paper?

I'm concerned that a Microsoft driver update may have caused this to start.
I have tried un-installing and re-installing the printer driver
software--same problem.

So I don't know if it is software or hardware related at this point...

Any suggestions would be most welcome!

Lee
 
Lee Wise said:
Is anybody having problems with their Epson printing part of a page
and then ejecting the paper and continuing the printout on the next
piece of paper?

I'm concerned that a Microsoft driver update may have caused this to
start. I have tried un-installing and re-installing the printer driver
software--same problem.

So I don't know if it is software or hardware related at this point...

Any suggestions would be most welcome!

Lee
Click to expand...
Are you sure it isn't feeding two sheets of paper together? My C80 will
sometimes feed the second sheet a few inches behind the first.
- Max



--
MisterMax
Slideshows of Angkor Wat, Bali, Crete, France, Malaysia, Maui, Morocco,
Mt Holly, Sicily, St Tropez, Singapore, Thailand, Tour de France:
http://buten.net/max/
(Yes,RemoveDoubles is part of my email address. The double letters in my
last name are not.)
 
Lee Wise said:
Is anybody having problems with their Epson printing part of a page and then
ejecting the paper and continuing the printout on the next piece of paper?

I'm concerned that a Microsoft driver update may have caused this to start.
I have tried un-installing and re-installing the printer driver
software--same problem.

So I don't know if it is software or hardware related at this point...

Any suggestions would be most welcome!

Lee
Click to expand...

i had this problem a few months ago. very frustrating.

sorry, i can't remember for sure what fixed it but i know i tried the
following:

- checked the printer defaults and program paper settings (i was trying to
print from
PHOTOSHOP... pretty sure this wasn't it).
- searched for updated driver (pretty sure i had latest).
- removed the printer from Windows, powered everything down, then restarted
and
let windows re-install (this might have been it, but i don't think so).

what i _think_ finally did it (contrary to all reason) was...

- i had an ink cartridge that needed to be replaced.

i'm thinking this may have been the time i absent-mindedly pulled a yellow
cartridge that was showing a low ink warning then put it back in place when
i realized i didn't have a replacement and only needed to do a few pages of
text. this tricked the software into showing it full.

i may have had the partial page problem a day or two later when it actually
went dry (yeah, short-term memory, what can i say?).

then again, this may be a conflation of two separate incidents.

good luck,


barrett
 
Thanks to those who responded.

I'm sure it was not two pages fed at the same time. Had that happen once or
twice long time ago.

As for the driver...yes, I did use the control panel to delete all EPSON
software (drivers). Then I did let the XP operating system do its thing and
install what it thought was the correct driver. I haven't tried anything
fancy yet, but so far it did print some CD labels correctly. I couldn't
even do that before.

As an aside, I got a response from Epson within one business day--as
advertised. Their suggestion was to disable advanced printing features.
I'm sorry but I had a problem with that one...

Lee

in message news:pjtRc.3527$yh.2115@fed1read05...
 
Back
Top