Epson Individual Ink cartridges

  • Thread starter Thread starter =?iso-8859-2?Q?=A3ukasz_Led=F3chowski?=
  • Start date Start date
?

=?iso-8859-2?Q?=A3ukasz_Led=F3chowski?=

Epson R300:

Before changing yellow ink:

K:38% C:17% M:66% Y:0% LC:38% LM:9%

After changing yellow ink:

K:34% C:13% M:61% Y:100% LC:34% LM:5%

Manual says that this is printer test. After changing ink 6 times
(every cartridge) we use 20% of every ink. It means that we use 1/5 of
every cartridge just to test the printer!!

When I did the same test with CX3650 with clogged head, the test didn't
even unclog the nozzles. I had to run cleaning to get them clear.

What are your experiences with Epson printers? Do you have similar with
Canon, HP or Lexmark?
 
What are your experiences with Epson printers? Do you have similar with
Canon, HP or Lexmark?
Click to expand...

Lexmark rip you off at the till.
Keep refilling your cartridges, it's cheap enough.
 
pete said:
Lexmark rip you off at the till.
Keep refilling your cartridges, it's cheap enough.
Click to expand...

I don't want to discuss about cartridge prices, I know them. I just
want to know about the details that you don't know when you buy the
printer. Printer test when changing every is one of them and makes
indvidual cartridges much less atractive.
 
Before changing yellow ink:
K:38% C:17% M:66% Y:0% LC:38% LM:9%
After changing yellow ink:
K:34% C:13% M:61% Y:100% LC:34% LM:5%

Manual says that this is printer test. After changing ink 6 times
(every cartridge) we use 20% of every ink. It means that we use 1/5 of
every cartridge just to test the printer!!
Click to expand...

Welcome to the sometimes false economy of individual ink tanks. Some designs
require a priming cycle at each ink supply insertion to clear air out of the
system. If the priming station is designed to prime all the ink supplies at
once you will put a significant amount of ink in the service station "diaper".
What are your experiences with Epson printers? Do you have similar with
Canon, HP or Lexmark?
Click to expand...

HP printers with integrated ink supplies and printheads do not do this. That
would include all DeskJet, Photosmart and PSC units, as well as many of the
Officejet products.

Regards,
Bob Headrick, not speaking for my employer HP
 
Bob said:
HP printers with integrated ink supplies and printheads do not do
this. That would include all DeskJet, Photosmart and PSC units, as
well as many of the Officejet products.
Click to expand...

What about business inkjets?
 
£ukasz Ledóchowski said:
Epson R300:

Before changing yellow ink:

K:38% C:17% M:66% Y:0% LC:38% LM:9%

After changing yellow ink:

K:34% C:13% M:61% Y:100% LC:34% LM:5%

Manual says that this is printer test. After changing ink 6 times
(every cartridge) we use 20% of every ink. It means that we use 1/5 of
every cartridge just to test the printer!!
Click to expand...

I can give you a picture from the other side of the fence. Since the single
cartridges became popular (read promoted or a craze ) my figures over
several 100 sales for many types show only a one percent difference in
consumption: Yellow is the Epson leader.
Whereas tracking the printers I use daily (Epson C80, 895, S-820) for
general printing the Epson's in particular often show low to empty across
alternate cartridges, but no increased use of any colour over 3 years in
use.
?? Tony
 
Of course you could waste money on a HP with the antiquated tri-color
scheme, spend $35 on a measely 14ml of ink.
 
Or, you could buy an hp business inkjet, get two tray support, Ethernet
connectivity, print speeds to rival laser, and quite reasonable photo results.
[Check how many colors are in some of canon's latest 'photo printer' offerings?]

Of course you could waste money on a HP with the antiquated tri-color
scheme, spend $35 on a measely 14ml of ink.
 
Of course you could waste money on a HP with the antiquated tri-color
scheme, spend $35 on a measely 14ml of ink.
Click to expand...

HP says that is enough for 400 pages with 5%/color. Epson C84 prints
280 pages with 3 cartridges x 8ml. If this is truth, capacity isn't a
value to compare efficiency.

Besides, I didn't want to discuss about that. I wanted to know about
additional hidden features of various printers that increase costs of
use.
 
There is a large size (more ink) black from Printpal.com
it had been great for my C84 use Cheaper and no problems.
fyi
 
What this is implying is that the amount of ink used during a change of
cartridge purge process is assumed in the firmware to be 4% of the total
usable amount. This may or may not be accurate.

However, as you state, that means each time any cartridge is replaced,
each cartridge loses something approaching 4%.

This is why I have stated many times that having individual cartridges
may not save any ink over a tricolor cartridge.

This is not a "test" by the way, it is simply a process that the printer
goes through to attempt to remove any air locks in the head where the
cartridge has been changed, and to help the new cartridge to begin working.

Art
 
Back
Top